Using The Digital Control Panel - PowerXL GLA-1003-NR Owner's Manual

Using the Digital Control Panel

3
1. Power Button
Once the appliance is plugged in, the Control
Panel will light up. Pressing the Power Button will
set the appliance to a default temperature of
370° F/188° C and time of 15 minutes. Pressing
the Power Button again will start the cooking
process. Pressing the Power Button during the
cooking cycle will shut off the appliance.
2. Internal Light
Selecting this button will help you check cooking
progress while the appliance is in operation. Note:
Opening the door during the cooking process will
pause the appliance. Internal light will illuminate if
the door opens.
3. Temperature Control Buttons
These buttons enable you to raise or lower
cooking temperature by 5° F (2.7° C) intervals
ranging from 150° F (65° C) to 400° F (204° C).
Dehydration ranges from 90° F (32° C) to
170° F (77° C).
6 7 8 9 10 11 12 13
1
2
4. Time Control Buttons
These buttons enable you to select an exact
cooking time to the minute, from 1 minute
to 90 minutes in all modes except when
dehydrating, which uses 30-minute intervals
and an operating time of 2–24 hours.
5. LED Digital Display
The Digital Numeric Display will alternate
between displaying the temperature and the
remaining time during the cooking process.
6–14. Cooking Presets
Selecting any Preset Button sets the time and
temperature to the preset's default value. The
cooking process starts automatically 5 seconds
after the Preset has been selected, or the Power
Button can be pressed after the Preset Button
to start the appliance immediately. You may use
the Time and Temperature Buttons to override
the preset settings.
5
4
14
PowerXL Air Fryer Home Pro™ 12 Qt.
9