Electrolux EFC 9650 User Manual page 19

Hide thumbs

Table of Contents

Available languages

Installation

Make sure that the cooker hood is disconnected fr

Make sur

e that the cooker hood is disconnected fr

e that the cooker hood is disconnected from the power supply befor

e that the cooker hood is disconnected fr

carrying out the installation.

Remove the anti-fat filter and the carbon filter support frame.

• Mark the wall with a centre line, this will aid mounting procedure (1)

template so that the mid line printed on the template matches with the centre

line previously drawn, the lower side of the template corresponds to the lower

side of the hood once mounted (2)

• Make 4 holes; 2 above to fix the support bracket of the hood and 2 below for

definitely fixing the hood. Insert 4 dowels in the wall.

Fix the support bracket of the hood with 2 screws (3)

• Drill two holes Ø 8mm on the upper side close to the ceilling, fit two wall plugs

(4) (4) (In case the hood is to be used in filter version

(4) (4)

(4)

chimney support with 4 screws) and fix the chimney support G G G G G with two screws

(5) (5).

(5) (5)

(5)

• Hook the hood on (6)

• Adjust the position of the hood (7-8)

• • • • • Fix the hood definitively with 2 screws and washers (9).

• Fit an exhausting pipe (10)

outside (Extractor hood) or to the deflector F F F F F (Filter version).

• Make electrical connection (11)

(2) (2).

(2) (2)

(6) (6).

(6) (6)

(7-8)

(10)

(10) to connect the outlet hole B B B B B of the hood to the

(10)

(11).

(11)

om the power supply before e e e e

om the power supply befor

(3) (3).

(3) (3)

filter version, mount the deflector F F F F F on the

filter version

(9).

electrolux

electrolux installation

electrolux

(1) (1), position the

(1) (1)

Table of Contents

Chapters

Table of Contents

Electrolux EFC 9650 User Manual page 19

Available languages

Chapters

Related Manuals for Electrolux EFC 9650

Related Products for Electrolux EFC 9650

Table of Contents