Telnet/Ssh - D-Link DIR-822 User Manual
Ac1200 wave 2 mu-mimo wi-fi easymesh router
Hide thumbs
Also See for DIR-822:
- User manual (235 pages) ,
- Quick installation manual (54 pages) ,
- Quick instillation manual (35 pages)
Table of Contents
Advertisement
DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual
Telnet/SSH
On the Management / Telnet/SSH page, you can enable or disable access to the device settings
via TELNET and/or SSH from your LAN. By default, access is disabled.
To enable access via TELNET and/or SSH, move the Enable Telnet switch and/or Enable SSH
switch to the right. In the Port field, enter the number of the router's port through which access will
be allowed (by default, the port 23 is specified for Telnet and the port 22 is specified for SSH).
Then click the APPLY button.
To disable access via TELNET and/or SSH again, move the Enable Telnet switch and/or Enable
SSH switch to the left and click the APPLY button.
Figure 142. The Management / Telnet/SSH page.
Page 186 of 213
Configuring via Web-based Interface
Advertisement
Table of Contents
