Gps Rf And Gps Bb Interface Checking - Nokia RH-3 Series Troubleshooting - Gps

CCS Technical Documentation
Figure 16: GPS 16.368 MHz reference clock from TCXO at J006
9 Connect spectrum analyzer probe on test pad J005
10 Check that LO is active by measuring LO/8 signal, which should be within
196.416 MHz +/- 2.946 kHz

GPS RF and GPS BB Interface Checking

1 Next connect oscilloscope 10:1 probe into GPS_CLK output of the N054 between
pin D7 and J008
2 GPS 16.368 MHz system clock to GPS BB should look like the following picture:
Issue 1 06/2003
Figure 17: GPS 16.368 MHz reference clock to GPS BB
Nokia Corporation
Troubleshooting — GPS
Confidential
RH-3
Page 23