Raising And Lowering The Seat Assembly; Removing A Bucket Seat; Installing A Bucket Seat; Removing A Bench Cushion - Toro Workman GTX Operator's Manual

Raising and Lowering the
Seat Assembly
To raise the seat assembly, push the seat assembly
forward until it rests on the steering wheel
To lower the seat assembly, push the seat assembly
rearward until it seats back into the original position
(Figure 26).
Figure 26

Removing a Bucket Seat

1. Push the seat assembly forward to the raised
position (Figure 26).
2. Slide the seat assembly to the side out of the
pins, and lift the seat assembly upward
27).
(Figure 26).
1. Pins

Installing a Bucket Seat

Slide the seat assembly onto the pins and lower the
seat assembly
g190066
1. Pins
(Figure

Removing a Bench Cushion

1. Push the bench cushion forward to the raised
position.
2. Slide the cushion to the side, out of the pins, and
lift the cushion upward
31
Figure 27
(Figure 28).
Figure 28
(Figure 29).
g190187
g190186