Charging With The Supply Unit; Charging In The Smartclean System - Philips 9000 Series Manual

Charging

Charging with the supply unit

2
1

Charging in the SmartClean system

Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty. The battery charge is
indicated by the lights of the battery charge
indicator on the display.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 60 minutes.
Note: You cannot use the shaver while it is
charging.
1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
When you connect the shaver to the wall
socket, you hear a sound.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1 Put the small plug in the back of the SmartClean
system.
2 Put the supply unit in the wall socket.
3 Press to open the SmartClean system cap,
to be able to place the shaver in the holder
('click').
37
English