Inverter Storage - Huawei SUN2000 Series User Manual

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)
User Manual
The following requirements should be met if the SUN2000 is not put into use directly:






Issue 11 (2019-06-08)
Put the SUN2000 in the original package. Keep the desiccant and seal it using the
adhesive tape.
Keep the storage temperature at –40° C to +70° C and the humidity at 5%–95% RH.
The inverter should be stored in a clean and dry place and be protected from dust and
water vapor corrosion.
A maximum of five SUN2000s with the packing dimensions (W x H x D) of 1095 mm x
395 mm x 745 mm can be stacked. A maximum of six SUN2000s with the packing
dimensions (W x H x D) of 1045 mm x 400 mm x 680 mm can be stacked. To avoid
personal injury or device damage, stack SUN2000s with caution to prevent them from
falling over.
Periodic inspections are required during the storage. If any rodent bites are found,
replace the packing materials immediately.
If the inverter has been long-term stored, inspections and tests should be conducted by
qualified personnel before it is put into use.
Copyright © Huawei Technologies Co., Ltd.
3

Inverter Storage

3 Inverter Storage
15