Getconfigparameter - Siemens SIMATIC RF310M Function Manual

RFID Reader Interface Reference
3.4 IRfReaderApi
3.4.28

GetConfigParameter

GetConfigParameter(parameterName : string) : RfInfoItem
Parameters
● parameterName
Return value(s)
The value for the configuration parameter in an RfInfoItem structure.
Exceptions
RfReaderApiException
Note
This function retrieves information about a given configuration parameter.
The RfInfoItem structure contains both the name and the value for a parameter. Moreover, it
provides information to which feature set the configuration parameter applies. Each
parameter might apply to either RFID, barcode or global configuration. A parameter can
apply to both RFID and barcode as well.
If a parameter with a given name is not available, null is returned. For known parameters
their current value is returned. Following is a list of the currently available parameters.
Some configuration parameters are for your information only. They do not prevent you from
using a special feature but give information on how a client or user interface should behave
to comply with what has been configured in RF-MANAGER. Those parameters are flagged
with Info in the last column of the table below.
72
The name of the configuration parameter whose value should be retrieved
Error while communicating with the reader service.
Check the Error member for more information.
Function Manual, 12/2010, J31069-D0198-U001-A2-7618
Mobile Readers