Other Information
Issues
No Picture, No Video
The TV will not turn on.
The TV turns off automatically.
There is no picture/Video.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
PC Connection
A ''Mode not supported'' message
appears.
"PC" is always shown on the source list,
even if a PC is not connected.
The video is OK but there is no audio.
26
English
solutions and Explanations
•
Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
•
Make sure the wall outlet is working.
•
Try pressing the
POWER
If the TV turns on, refer to 'Remote control does not work' below.
•
Ensure the
sleep Timer is set to Off in the setup menu. (P. 16)
•
If your PC is connected to the TV, check your PC power settings.
•
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
•
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15
minutes if there is no signal.
•
Check cable connections. (remove and reconnect all cables connected to the TV and external
devices).
•
Set your external devis' (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device's output is : HDMI, it should be
connect to an HDMI input on the TV.
•
Make sure your connected devics are powered on.
•
Be sure to select the TV's correct source by pressing the
control.
•
Reboot the connected device by reconnecting the device's power cable.
•
Make sure the coaxial cable is connected securely.
•
Please try
Auto Program to add available channels to the channel list. Go to
- Auto program then select Auto and make sure correct Cable TV signal type is set in the
menu. (P. 13)
•
Verify the Antenna is positioned correctly.
•
Compression of video contents may cause picture distortion. especially on fast moving pictures
such as sports and action movies.
•
A low signal can cause picture distortion. This is not a TV problem.
•
Set your PC's output resolution so they match the resolutions supported by the TV.
•
This is normal; "PC" is always shown on the source list, regardless of whether a PC is
connected.
•
If you are using a HDMI connection, check the audio output setting on your PC.
button on the TV to make sure the problem is not the remote.
button on the remote
sOURCE
- Channel
MEnU