12
Initial Power-Up
Once the batteries are installed in the unit, the Call Button
blinks and LCD display shows
Interface ENA.
If the USB Serial Interface is not to be used, press the ESC
button to exit this mode. The default status screen will be
shown on the display. If nothing is pressed, the unit will en-
ter sleep mode after 60 seconds and the screen will clear.
Status Screen
The Status Screen toggles the current Frequency and
CTCSS setting continuously.
LCD DISPLAY
INTERFACE ENA
-ESC to EXIT-
Freq No: 6
MHZ:467.8750
Freq No: 6
MHZ:467.8750