Setup; Greasing The Machine; Product Overview; Controls - Toro Groundsmaster 4000 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Operator training materials
Declaration of Conformity
Caster Cap Wrench
CE Safety Decal
Note:
Determine the left and right sides of the
machine from the normal operating position.
1

Greasing the Machine

No Parts Required
Procedure
Grease the machine before use; refer to
(page 47).
Important:
Failure to properly grease the
machine will result in premature failure of critical
parts.
Description
No parts required
Lubrication
Qty.
–
Qty.
1 Review before operating the machine.
1 Use to reference engine information.
1
Review before operating the machine.
1
1 Use to adjust caster wheel assemblies.
1 Apply for compliance with standards in CE countries

Product Overview

Controls

Note:
Determine the left and right sides of the
machine from the normal operating position.
1. Brake pedal
2. Pedal-locking latch
3. Traction pedal
15
Use
Grease the machine.
Use
Figure 3
4. Parking-brake latch
5. Tilt-steering lever
g203048