(2): Keyboard backlight cable (select models only)
(3): Keyboard cable
(4): Speaker cable
2.
Remove the two Phillips PM2.5×6.0 screws (1) that secure the USB Type-C bracket to the system board.
3.
Remove the bracket (2).
4.
Remove the eight Phillips PM2.0×3.0 screws (3) that secure the system board to the computer.
5.
Lift the right speaker (1)
6.
Rotate the right side of the system board upward (2)
54
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts