Contents Safety information .......................... iii General Safety guidelines..................................iii Chapter 1. Getting started ......................1-1 Shipping contents ....................................1-1 Notice for use ....................................... 1-2 Product overview....................................1-3 Types of adjustments ..................................1-3 Tilt........................................1-3 Monitor controls....................................1-4 Cable lock slot....................................1-4 Setting up your monitor ..................................
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached.
Setup Poster for brief information. Shipping contents The product package should include the following items: • Flat Panel Monitor • Information Flyer • Lenovo Limited Warranty Booklet (Optional) • Analog Cable (for VGA use) • HDMI Cable (Optional) • Stand •...
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Chapter 1.
Monitor controls The keypad controls on the panel frame are accesses to various functions. For information on how to utilize these keypad controls, please see “Adjusting your monitor image”on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor. Chapter 1.
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information on page iii before carrying out this procedure. Power off your computer and all attached devices, then unplug the computer power cord. Connect the cables according to below icon indication.
Page 10
For computer in HDMI connecting. Note: Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the "Lenovo HDMI to HDMI cable OB47070" www.lenovo.com/support/monitor accessories HDMI HDMI 5. Connect the speaker's audio cable and audio jack of monitor to transfer audio source from HDMI.
Page 11
7. Power on the monitor and the computer. 8. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website: http://support.lenovo.com/docs/D22_20. Refer to the ““Manually installing the monitor driver”on page 3-5” section to install the driver.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
The following are some other tips for comfortable viewing of your monitor: • Use adequate lighting for the type of work you are performing. • Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. •...
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On-Screen Display (OSD) is not displayed. Icon Control Description Switches the video input source Input Source Shift back to previous level when in OSD mode Press and hold for 10 seconds to enable or disable the...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. D22-20 1920 x1080 Brightness Contrast Display Mode Scaling Mode Input Signal: VGA To use the controls: Press to open the main OSD menu.
Page 16
Table 2-1. OSD functions OSD Icon on Controls and Sub menu Description Main Menu Adjustments Brightness Adjusts overall screen brightness. Contrast Adjusts difference between light and dark areas. Enable dynamic contrast ratio. • • All input ports Display Mode Standard/Game/Web/Movie/Picture Scaling Mode Selects type of scaled image.
Page 17
Table 2-1. OSD functions OSD Icon on Controls and Sub menu Description Main Menu Adjustments Information Shows Model name, refresh rate, and product details. This screen does not allow any changes to the settings. Language Changes languages of menu. The language chosen only affects the language of the OSD.
Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Power Management Modes Horizontal Vertical Power VESA Modes Video Power Consumption Sync Sync Indicator 16 W (maximum)* Normal operation Active Active Active White 14 W (typical) Active-off mode Inactive Inactive Amber Less than Switch off Less than * Maximum power consumption with max luminance. This document is informational only and reflects laboratory performance.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. •...
Page 22
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), the type of VESA mounting screw is M4 x 10 mm. VESA hole Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting kit.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model D22-20 Dimensions Depth 206.2 mm (8.12 in) Height 386.4 mm (15.21 in) Width 507.2 mm (19.97 in)
Page 24
Table 3-1. Monitor specifications for type-model D22-20 Communications VESA DDC/CI Supported display Horizontal frequency 30 KHz - 83 KHz modes Vertical frequency 50 Hz - 75 Hz Native Resolution 1920 x 1080 at 60 Hz Temperature Operating 0° to 40° C (32° to 104° F) Storage -20°...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power The video signal cable Be sure the video cable is “Connecting and indicator is amber, is loose or disconnected connected with the system turning on your but there is no from the system or properly.
(where X indicates “the folder in which the downloaded driver is located”(such as a desktop)). 14. Select the "D22-20.inf" file and click the Open button. Click the OK button. 15. In the new window, select D22-20 and click Next. 16. After the installation is complete, delete all downloaded files and close all windows.
(where X indicates“the folder in which the downloaded driver is located” (such as a desktop)). 14. Select the "D22-20.inf" file and click the Open button. Click the OK button. 15. In the new window, select D22-20 and click Next. 16. After the installation is complete, delete all downloaded files and close all windows.
Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacturer. Do not use the ac power cord for other devices. Appendix B.