D-Link DVA-2800 User Manual page 57

Section 4 - Configuration
Qos
QoS (quality of service) allows you to prioritize traffic to optimize your
connection. Configure DSCP (Differentiated Services Code Points)
below.
RTP: Select the DSCP for RTP connections.
SIP: Select the DSCP for RTP connections.
Fax settings
T38: Select Enable to enable T.38 for fax over IP.
Dial Plan
Please Input Input the dial plan number table in Asterix syntax. The dial plan tells
Number Table: your router how to interpret numbers dialed by the user and relay
them to your VoIP provider. This is pre-configured with your region's
dial plan. Your VoIP provider should provide you with this information.
Basic Call Control
Flash Min:
Set the minimum amount of time in ms the link should go "on the
hook" before being considered a flash command.
Flash Max: Set the maximum amount of time in ms the link should go "on the
hook" before being considered a flash command.
Click Save when you are done.
D-Link DVA-2800 User Manual
VoIP Advanced (Cont)
53