Page 2
Contents Items LT-26DA9BN LT-26DA9BJ LT-26DC9BH LT-26DA9BU Dimensions ( W × H × D ) 66.0 cm × 48.2 cm × 20.0 cm [66.0 cm × 44.0 cm × 9.0 cm (Without stand)] Mass 10.5 kg [9.0 kg (Without stand)] Power Input AC220V - AC240 V, 50 Hz Power Consumption 95 W (Standby: 0.9 W)
Page 3
Contents Items LT-26DB9BD LT-26ED91U Dimensions ( W × H × D ) 66.0 cm × 48.2 cm × 20.0 cm [66.0 cm × 44.0 cm × 9.0 cm (Without stand)] Mass 10.5 kg [9.0 kg (Without stand)] Power Input AC220V - AC240 V, 50 Hz Power Consumption 110 W (Standby: 0.9 W) TV RF System...
SECTION 1 PRECAUTION SAFETY PRECAUTIONS [EXCEPT FOR UK] (1) The design of this product contains special hardware, (6) Isolation Check (Safety for Electrical Shock Hazard) many circuits and components specially for safety After re-assembling the product, always perform an isola- purposes.
Page 5
SAFETY PRECAUTIONS [FOR UK] (1) The design of this product contains special hardware and many circuits and components specially for safety purposes. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits.
Page 6
HANDLING LCD PANEL (3) AVOID VIBRATIONS AND IMPACTS The unit may be broken if it is toppled sideways even when 1.4.1 PRECAUTIONS FOR TRANSPORTATION properly packed. Continuous vibration may shift the gap of When transporting the unit, pressure exerted on the internal LCD the panel, and the unit may not be able to display images panel due to improper handling (such as tossing and dropping) properly.
SECTION 2 SPECIFIC SERVICE INSTRUCTIONS FEATURES DIGITAL TUNER PICTURE MODE This TV can receive both DVB-T (Digital terrestrial broadcasting: This function can adjust the picture settings automatically. DA9/DB9/EP9U only), DVB-S(Digital satellite broadcasting: DB9 There are BRIGHT, STANDARD, SOFT and MANUAL in the only), DVB-C(Digital cable broadcasting: DH9 only) and PICTURE MODE.
Page 8
21-PIN EURO CONNECTOR (SCART) : EXT-1 / EXT-2 Pin No. Signal designation Matching value EXT-1 EXT-2 AUDIO R output 500mV(rms) (Nominal), Low impedance Used (TV OUT) Used (LINE OUT) AUDIO R input 500mV(rms) (Nominal), High impedance Used (R1) Used (R2) AUDIO L output 500mV(rms) (Nominal), Low impedance Used (TV OUT)
Page 9
TECHNICAL INFORMATION 2.4.1 LCD PANEL This unit uses the flat type LCD (Liquid Crystal Display) panel that occupies little space, instead of using the conventional CRT(Cathode Ray Tube). This panel adopts "normally white" mode where the transmittance or reflective rate is maximum, and the screen is white when no voltage is applied.
SECTION 3 DISASSEMBLY CAUTION AT DISASSEMBLY • Make sure that the power cord is disconnected from the outlet. • Pay special attention not to break or damage the parts. • Make sure that there is no bent or stain on the connectors before inserting, and firmly insert the connectors. •...
Page 11
SIDE REAR COVER SHIELD SMART DTV PWB POWER UNIT MAIN SHIELD POWER MAIN PWB BRACKET INVERTER PWB COVER LCD CONTROL PWB COVER PANEL BRACKET LCD CONTROL STAND LCD PANEL PANEL INVERTER BRACKET BLUE LED MODULE SPEAKER IR PWB CONTROL KNOB SPEAKER FRONT KEY PWB...
Page 12
MEMORY IC REPLACEMENT • This model uses the memory IC. • This memory IC stores data for proper operation of the video and drive circuits. • When replacing, be sure to use an IC containing this (initial value) data. 3.3.1 MEMORY IC REPLACEMENT PROCEDURE 1.
Page 13
3.3.3 SETTINGS OF FACTORY SHIPMENT 3.3.3.1 BUTTON OPERATION 3.3.3.2 REMOTE CONTROL DIRECT OPERATION Setting item Setting position Setting item Setting position POWER CHANNEL CHANNEL VOLUME VOLUME ZOOM AUTO SUB POWER 3.3.3.3 REMOTE CONTROL MENU OPERATION (1) Picture (4) Feature Setting item Setting position Setting item Setting position...
Page 14
REPLACEMENT OF CHIP COMPONENT 3.4.1 CAUTIONS (1) Avoid heating for more than 3 seconds. (2) Do not rub the electrodes and the resist parts of the pattern. (3) When removing a chip part, melt the solder adequately. (4) Do not reuse a chip part after removing it. 3.4.2 SOLDERING IRON (1) Use a high insulation soldering iron with a thin pointed end of it.
SECTION 4 ADJUSTMENT ADJUSTMENT PREPARATION (1) This TV is adjusted by using REMOTE CONTROL UNIT. (2) The adjustment using the REMOTE CONTROL UNIT is made on the basis of the initial setting values. The setting values which adjust the screen to the optimum condition can be different from the initial setting values. (3) Make sure that connection is correctly made AC to AC power source.
Page 16
4.5.3 CHANGE AND MEMORY OF SETTING VALUE 4.5.4 FACTORY MODE SELECT KEY LOCATION SELECTION OF SETTING ITEM • [FUNCTION / ] key. [MUTING] key For scrolling up / down the setting items. • [FUNCTION / ] key. For select the setting items. CHANGE OF SETTING VALUE (DATA) •...
Page 17
Variable Default Swetting item Comment range Value CVBS(EXT-4) Brightness 0 - 100 Adjust the Brightness value of Standard mode in CVBS(EXT-4). Contrast 0 - 100 Adjust the Contrast value of Standard mode in CVBS(EXT-4). Standard Sharpness 0 - 100 Adjust the Sharpness value of Standard mode in CVBS(EXT-4). Colour 0 - 100 Adjust the Colour value of Standard mode in CVBS(EXT-4).
Page 18
Variable Default Swetting item Comment range Value Brightness 0 - 100 Adjust the Brightness value of Standard mode in YC(EXT-4S). Contrast 0 - 100 Adjust the Contrast value of Standard mode in YC(EXT-4S). Standard Sharpness 0 - 100 Adjust the Sharpness value of Standard mode in YC(EXT-4S). Colour 0 - 100 Adjust the Colour value of Standard mode in YC(EXT-4S).
Page 19
Variable Default Swetting item Comment range Value Brightness 0 - 100 Adjust the Brightness value of Standard mode in HDMI(EXT-5 EXT-6 EXT7) Contrast 0 - 100 Adjust the Contrast value of Standard mode in HDMI(EXT-5 EXT-6 EXT7) Standard Sharpness 0 - 100 Adjust the Sharpness value of Standard mode in HDMI(EXT-5 EXT-6 EXT7) Colour 0 - 100...
ADJUSTMENT PROCEDURE 4.7.1 VIDEO CIRCUIT Measuring Item Test point Adjustment part Description instrument WHITE Remote [White Balance] (1) Set COLOUR TEMP. to "Normal". BALANCE control unit Normal R (2) Select "White Balance" from the FACTORY Normal G MODE. Signal Normal B (3) Receive a PAL 75% all white signal.
Page 21
PARTS LIST CAUTION The parts identified by the symbol are important for the safety . Whenever replacing these parts, be sure to use specified ones to secure the safety. The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No. columns will not be supplied. P.W.
Page 22
CONTENTS USING P.W. BOARD & REMOTE CONTROL UNIT ....................3-2 EXPLODED VIEW PARTS LIST ..........................3-3 EXPLODED VIEW PARTS LIST ..........................3-4 EXPLODED VIEW ............................... 3-5 PRINTED WIRING BOARD PARTS LIST [LT-26DA9BJ, LT-26DA9BU] ..............3-6 MAIN P.W. BOARD ASS'Y (HU-71200009) ...................... 3-6 MPEG P.W.
EXPLODED VIEW PARTS LIST Ref.No. Part No. Part Name Description Local HU-0130100002 DIGITAL(LVDS) CABLE HU-014213230PN REAR COVER LT-26DA9BJ,LT-26DA9BU,LT-26DB9BD,LT-26DC9BH,LT-26ED91U HU-014213231PN REAR COVER LT-26DA9BN HU-014213210PN FRONT CABINET LT-26DA9BJ,LT-26DA9BN,LT-26DA9BU,LT-26DB9BD,LT-26DC9BH HU-014213211PN FRONT CABINET LT-26ED91U QLD0550-001 LCD PANEL UNIT HU-0141300014 Inc.3A-3B ...
PRINTED WIRING BOARD PARTS LIST [LT-26DA9BJ, LT-26DA9BU] MAIN P.W. BOARD ASS'Y (HU-71200009) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local HU-001060250 C CAPACITOR 0.1uF 16V K HU-001060286 C CAPACITOR 10uF 10V HU-004020013 HU-001060250 C CAPACITOR 0.1uF 16V K...
Page 26
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C237 HU-001060236 C CAPACITOR 10uF 25V C637 HU-001060250 C CAPACITOR 0.1uF 16V K C238 HU-001060219 C CAPACITOR 1000pF 50V K C660 HU-001060250 C CAPACITOR 0.1uF 16V K C263 HU-001060219...
Page 27
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local HU-002000405 MG RESISTOR 1kΩ R351 HU-002001060 MG RESISTOR 220kΩ HU-002000405 MG RESISTOR 1kΩ R353 HU-002001060 MG RESISTOR 220kΩ HU-002000417 MG RESISTOR 4.7kΩ R355 HU-002000433 MG RESISTOR 0Ω...
Page 28
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R666 HU-002000437 MG RESISTOR 10kΩ L235 NQL812K-1R8X PEAKING COIL 1.8uH R667 HU-002000417 MG RESISTOR 4.7kΩ L236 NQL812K-1R8X PEAKING COIL 1.8uH R668 HU-002000417 MG RESISTOR 4.7kΩ...
MPEG P.W. BOARD ASS'Y (HU-71200005) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C344 HU-001060250 C CAPACITOR 0.1uF 16V K C345 HU-001060250 C CAPACITOR 0.1uF 16V K HU-000030020 ASIC C346 HU-001060250 C CAPACITOR 0.1uF 16V K HU-000120027 CMOS 1-INPUT INVERTER...
Page 30
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local HU-002070006 NET RESISTOR 47Ωx4 R437 HU-002000417 MG RESISTOR 4.7kΩ HU-002070006 NET RESISTOR 47Ωx4 R438 HU-002000437 MG RESISTOR 10kΩ PR40 HU-002070003 NET RESISTOR 10kΩx4 R439 HU-002001138 MG RESISTOR 560Ω...
PRINTED WIRING BOARD PARTS LIST [LT-26DB9BD] MAIN P.W. BOARD ASS'Y (HU-71200009) Ref No. Part No. Part Name Description Local REFER TO PARTS LIST IN PAGE 3-5 FOR THIS P.W. BOARD. C195 HU-001060250 C CAPACITOR 0.1uF 16V K C230 HU-001060288 C CAPACITOR 1uF 25V C231 HU-001060265...
Page 33
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C753 HU-001060250 C CAPACITOR 0.1uF 16V K HU-002000527 MG RESISTOR 100Ω C754 HU-001071192 E CAPACITOR 10uF 25V HU-002000527 MG RESISTOR 100Ω C755 HU-001071192 E CAPACITOR 10uF 25V R100 HU-002000527...
PRINTED WIRING BOARD PARTS LIST [LT-26DA9BN, LT-26ED91U] MAIN P.W. BOARD ASS'Y (HU-71200026) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local HU-001060250 C CAPACITOR 0.1uF 16V K HU-001060286 C CAPACITOR 10uF 10V HU-004020013 HU-001060250 C CAPACITOR 0.1uF 16V K...
Page 36
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C237 HU-001060236 C CAPACITOR 10uF 25V C637 HU-001060250 C CAPACITOR 0.1uF 16V K C238 HU-001060219 C CAPACITOR 1000pF 50V K C660 HU-001060250 C CAPACITOR 0.1uF 16V K C263 HU-001060219...
Page 37
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local HU-002000405 MG RESISTOR 1kΩ R351 HU-002001060 MG RESISTOR 220kΩ HU-002000405 MG RESISTOR 1kΩ R353 HU-002001060 MG RESISTOR 220kΩ HU-002000417 MG RESISTOR 4.7kΩ R355 HU-002000433 MG RESISTOR 0Ω...
Page 38
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R666 HU-002000437 MG RESISTOR 10kΩ L235 NQL812K-1R8X PEAKING COIL 1.8uH R667 HU-002000417 MG RESISTOR 4.7kΩ L236 NQL812K-1R8X PEAKING COIL 1.8uH R668 HU-002000417 MG RESISTOR 4.7kΩ...
MPEG P.W. BOARD ASS'Y (HU-71200005) REFER TO PARTS LIST IN PAGE 3-9 FOR THIS P.W. BOARD. IR P.W. BOARD ASS'Y (HU-72200001) REFER TO PARTS LIST IN PAGE 3-11 FOR THIS P.W. BOARD. KEY P.W. BOARD ASS'Y (HU-72200002) REFER TO PARTS LIST IN PAGE 3-11 FOR THIS P.W. BOARD. (No.YA606<Rev.002>)3-19...
PRINTED WIRING BOARD PARTS LIST [LT-26DC9BH] MAIN P.W. BOARD ASS'Y (HU-71200026) Ref No. Part No. Part Name Description Local REFER TO PARTS LIST IN PAGE 3-15 FOR THIS P.W. BOARD. C337 HU-001060250 C CAPACITOR 0.1uF 16V K C338 HU-001060250 C CAPACITOR 0.1uF 16V K C339 HU-001060250...
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local PR383 HU-002070050 NET RESISTOR 47Ωx4 R700 HU-002000407 MG RESISTOR 2.2KΩ PR750 HU-002070014 NET RESISTOR 33Ωx4 R701 HU-002000437 MG RESISTOR 10kΩ HU-002000090 COIL R702 HU-002000437 MG RESISTOR 10kΩ...
PACKING 12 13 PACKING PARTS LIST Ref.No. Part No. Part Name Description Local HU-3070130001PK CARTON BOX HU-3071126001PS TOP CUSHION(L) HU-3071126002PS TOP CUSHION(R) HU-3071126003PS BOTTOM CUSHION(L) HU-3071126004PS BOTTOM CUSHION(R) HU-3072108002 POLY BAG HU-013000096 POWER CORD LT-26DA9BJ HU-013000097 POWER CORD LT-26DA9BN,LT-26DA9BU,LT-26DB9BD,LT-26DC9BH,LT-26ED91U HU-2001000003 INST BOOK...
Page 44
LT-26DA9BJ, LT-26DA9BU, LT-26DB9BD STANDARD CIRCUIT DIAGRAM NOTE ON USING CIRCUIT DIAGRAMS 1.SAFETY Type No indication : Ceramic capacitor The components identified by the symbol and shading are : Metalized mylar capacitor critical for safety. For continued safety replace safety ciritical : Polypropylene capacitor components only with manufactures recommended parts.
WIRING DIAGRAM LCD PANEL UNIT LCD PANEL UNIT [INVERTER PWB] [LCD CONTROL PWB] DIGITAL TUNER KEY PWB JP900 MPEG PWB JP710 JP680 JP630 JP681 250V/6.3A POWER UNIT JP682 ANALOG TUNER AC INLET JP581 MAIN PWB IR PWB SPEAKER(L) SPEAKER(R) (No.YA606<Rev.001>)2-3 2-4(No.YA606<Rev.001>)
Page 95
Victor Company of Japan, Limited Display category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan (No.YA606<Rev.001>) Printed in Japan...