Toshiba e-STUDIO 2000AC Copying Manual page 85

3.HOW TO USE EDITING FUNCTIONS
3 Place the original on the original glass with its face up.
Place it with its bottom toward you. Align its top left corner against that of the original glass so that the original
will be aligned with the original scales.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
Read the following 4 values to specify the area using the left and top scales on the original glass.
4
 X1: From the top left to the left edge of the selected area
 X2: From the top left to the right edge of the selected area
 Y1: From the top left to the upper edge of the selected area
 Y2: From the top left to the lower edge of the selected area
Note that the marks of the original scales have a 2 mm (0.08") pitch.
Key in the read values, and press [OK].
5
Press [X1], [X2], [Y1] and [Y2], and then enter the read values correspondingly.
You can specify up to 4 areas on 1 page. When you want to specify more than one area, press [Area 1] to [Area 4]
to switch the area, and then key in the values correspondingly.
Editing Scanned Images 85