Figure 4.3-1 E8 Standard + Additional Comms (Irig B + Rs485) (See Note 2); Figure 4.3-2 E8 Standard + Additional Comms (Irig B + Rs232) - Siemens 7SR210 Installation Manual

7SR21 & 7SR22 - Installation Guide
Figure 4.2-3 E8 Standard + Additional Comms (IRIG B + RS485) (See Note 2)
Figure 4.2-4 E8 Standard + Additional Comms (IRIG B + RS232)
Notes
1) Recommended terminations are pre-insulated & must be crimped using approved tooling.
2) RS485 (block "B" terms 14, 16, 18, 20) connections to this communication facility is by screened, twisted pair
cable. On site when wiring other facilities ensure that these terminals are not obscured by other wiring runs. Cable
should be RS485 compliant.
Page 12 of 24 ©2011 Siemens Protection Devices Limited