Philips 5000 Series Manual page 35

Replacement reminder
Turbo setting
Charging
For maximum shaving performance, we advise you
to replace the shaving heads every two years. The
appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The shaving unit symbol and
arrows light up to indicate that you have to replace
the shaving heads.
Note: After replacing the shaving heads, you need
to reset the replacement reminder by pressing the
on/off button for 7 seconds.
The appliance is equipped with a Turbo or Turbo+
setting. This setting is intended for quicker and
more intense shaving and makes hard-to-reach
areas easier to shave.
(S5396/12, S5395/26, S5395/12 only).
Activating the Turbo setting
1 To activate the Turbo setting, press the Turbo
button once when the appliance is switched on.
Deactivating the Turbo setting
1 To deactivate the Turbo setting, press the Turbo
button once.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty. Charging takes approx. 1
hour.
S5396/12, S5395/26, S5395/12: a fully charged
shaver provides up to 50 shaving minutes.
34
13
English
E nglish