Yamaha 2008 WR250R Owner's Manual page 34

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
1. Distance A
4
Spring preload:
Minimum (soft):
Distance A = 216 mm (8.50 in)
5
Standard:
Distance A = 211.5 mm (8.33 in)
Maximum (hard):
6
Distance A = 206 mm (8.11 in)
7
Rebound damping force
To increase the rebound damping force
8
and thereby harden the rebound damp-
ing, turn the adjusting dial in direction
9
(a). To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting dial in di-
rection (b).
1
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
Standard:
Maximum (hard):
* With the adjusting dial fully turned in
direction (a)
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
1
(b)
(a)
25 click(s) in direction (b)*
12 click(s) in direction (b)*
3 click(s) in direction (b)*
3-16
the adjusting screw in direction (b).
(a)
(b)
1. Compression damping force adjusting
screw
Compression damping setting:
Minimum (soft):
12 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
NOTE:
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
1