Canon iPF785 User Manual page 461

iPF785
Adjust Feed Adj.
Printer Priority Quality
Adjust
Length
Mainte- Head Cleaning
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head Info
GL2 Set- Quality Color
tings Manager Mode
User's Guide
Setting Item
Auto(OtherPaper)
Manual
Adjust- A:High
ment-
B:Standard/Draft
Print
Change A:High
Settings
B:Standard/Draft
Monochrome
Color (CAD) 1
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Description, Instructions
The printer prints and reads a test pattern for automatic ad-
justment of the feed amount. Note that this function takes
more time and consumes more ink than Auto(Genu-
inePpr). (See "Automatic Banding Adjustment.")
Use this mode with highly transparent media or other paper
for which Auto(GenuinePpr) or Auto(OtherPaper) cannot
be used.
Print a test pattern for adjustment of the feed amount based
on the type of paper. (See "Manual Banding Adjust-
ment.")
P.582
➔
Print a test pattern for particular types of paper to compen-
sate for paper stretching or shrinkage, after which you enter
the amount of adjustment. (See "Adjusting Line
Length.")
P.584
➔
Displayed when you have selected Feed Priority > Adj.
Priority > Print Length.
Adjustment relative to the amount of stretching or shrinkage
of the current paper.
Enter either the adjustment results from AdjustmentPrint
or the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount by
choosing a higher adjustment value. For paper that tends to
shrink, decrease the feed amount by choosing a lower ad-
justment value. (See "Adjusting Line Length.")
Clean the Printhead. (See "Cleaning the Print-
head.")
P.598
➔
Choose Head Cleaning A if printing is faint, oddly colored,
or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if
printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Execute when replacing the Printhead. Follow the instruc-
tions displayed to complete the required procedure. (See
"Replacing the Printhead.")
P.599
➔
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Execute when replacing the Maintenance Cartridge. Follow
the instructions displayed to complete the required proce-
dure. (See "Replacing the Maintenance Car-
tridge.")
P.606
➔
Indicates information about the printhead.
Print in monochrome.
Print in standard colors.
Print with approximate colors emulating Canon iPF750,
iPF755, iPF650, iPF655, iPF760, iPF765.( *2 )
Print with approximate colors emulating Canon iPF500,
iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720,
iPF810, iPF820, iPF815, iPF825.( *2 )
Print emulating the HP Designjet 500/800, in colors resem-
bling colors produced by these printers.( *2 )
Print emulating the HP Designjet T1100, in colors resem-
bling colors produced by this printer.( *2 )
Menu Settings
P.580
➔
P.584
➔
461