Maintenance; Recommended Maintenance Schedule - Toro 41106 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 8 hours
8 hours
25 hours
50 hours
100 hours
200 hours
400 hours or yearly
800 hours or yearly
1
More often when operating under heavy load or high temperatures
2
More often in dusty, dirty conditions
3
More often when using wetable powers
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Torque the wheel lug nuts.
Replace the hydraulic filter.
Check the drive belt tension.
Check the steering pump belt.
Check the engine oil.
Check the tire pressure.
Clean the suction strainer
Clean and oil the foam air cleaner element.
Check the battery electrolyte level.
Check the battery cable connections.
Clean the suction strainer.
Change the engine oil (includes synthetic oil).
Replace the engine oil filter.
Lubricate all grease fittings.
Replace the fuel filter.
Inspect the brakes.
Clean the engine rotating screen.
Replace the paper cleaner element.
Inspect the brake and parking brake.
Inspect the condition and wear of the tires.
Torque the wheel lug nuts.
Check the front wheel toe-in.
Check the steering pump belt.
Check the operation of the Neutral gear shift position.
Change the spark plugs.
Check the parking brake.
Check the shift cables.
Check the drive belt.
Change the pump drive gearbox fluid.
Inspect the fuel lines.
Change the transaxle/hydraulic fluid.
Replace the hydraulic filter.
26
3
2
1
2
2