Supporting The Motorcycle - Yamaha 2005 MT-01 Owner's Manual

1. Screw
2. Headlight unit side cover bracket
3. Headlight unit side cover
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Auxiliary light bulb socket
4. Remove the defective bulb by pull-
ing it out.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Auxiliary light bulb
5. Insert a new bulb into the socket.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the headlight unit side cover
and the headlight unit side cover
bracket by installing the screws.
8. Install the headlight unit by install-
ing the bolts.
6-31

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.
To service the front wheel
1. Stabilize the rear of the motorcycle
by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.
2. Raise the front wheel off the
ground by using a motorcycle
stand.
To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing
EAU24350
6