Section 4: Configuration
In a typical application, when motion is detected, the DCS-2230L sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specified action will be performed. You can configure the DCS-2230L to send snapshots or videos to your e-mail address or FTP site.
ex.
Motion Detection,
Periodically, Digital
Input, System Reboot
To start plotting an event, it is suggested to configure server and media columns first so that the DCS-2230L will know what action shall be
performed when a trigger is activated.
D-Link DCS-2230L User Manual
Event
Condition
Media
(what to send)
ex.
Snapshot, Video Clips
Event Setup
Action
(where to send)
Server
ex.
E-mail, FTP
46