Specifications - Toro 74922 Operator's Manual

Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades, push
the blade control switch (PTO) down or move a motion
control lever into the neutral lock position.
Ignition Switch
This switch is used to start the mower engine and has three
positions: Start, Run and Off.
Motion Control Levers
The motion control levers are used to drive the machine
forward, reverse, and turn either direction.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system to engage and to determine neutral position.
Fuel Shut-off Valve
Close the fuel shut-off valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories are
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.

Specifications

Note: Specifications and design are subject to change
without notice.
Width:
48 inch Deck
Without Deck 45.7 inches (116.1
cm)
Deflector Up 54 inches (137.2
cm)
Deflector Down 63.6 inches (161.4
cm)
Length:
Roll Bar - Up
Roll Bar - Down
Height:
Roll Bar - Up
70.5 inches (179.1 cm)
Weight:
Model
74922
78922
78924
52 inch Deck
45.7 inches (116.1
cm)
57.5 inches (146.0
cm)
67.6 inches (171.8
cm)
13
48 inch Deck 52 inch Deck
79.2 inches (201.2 79.2 inches (201.2
cm) cm)
80.9 inches (205.5 80.9 inches (205.5
cm) cm)
Roll Bar - Down
46.8 inches (118.9 cm)
Weight
1147lb (520 kg)
1147lb (520 kg)
1147lb (520 kg)