Hitachi CP-AX2505 User Manual page 38

3. Web Control
NOTE
Adobe Flash Player on your computer to use Crestron e-Control
® ®
e-Control is not displayed in a web browser that does not support Flash
®
Control is displayed.
then start Web browser.
example below, and then press the Enter key or
Example: If the IP address of the projector is set to 192.168.1.10:
Enter "http://192.168.1.10/" into the address bar of the web browser
and press the Enter key or click
projector and your computer are
connected to the same network
correctly, the selection window will be
displayed.
NOTE
errors in the projector.
OSD on the projector. If you want to change it, you need to change the OSD
language on the projector. (
38
is created using Flash
®
in the Network Settings (
®
. You need to install
®
45) is set to Disable, the
button.
button.
. Crestron
®
.
®