2.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Disconnect the cable (1) from the module.
c.
Remove the webcam/microphone module (2). (The module is attached to the display enclosure
with double-sided tape.)
3.
To remove the display panel:
a.
Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the enclosure.
b.
Rotate the display panel onto the keyboard (1) to gain access to the display cable connection on
the back of the panel.
c.
On the back of the display panel, release the adhesive strip (2) that secures the display panel cable
to the display panel, and then disconnect the cable (3).
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts