Canon imageRUNNER 2530 Service Manual Digest page 43

the dialed number will be indicated on the LCD/ Report screen.
At "0" on this Bit, even though the dialed number is acknowledged, LCD/Report screen will
indicate nothing.
Detailed Discussions of Bit 3
When "Display" is selected, adds a Message Language menu to the user data "System
Setting". This allows selecting different languages which to show displays and reports.
● SSSW-SW28
List of Functions
Bit Function
0 Caller V.8 protocol
1 Called party V.8 protocol
2 Caller V.8 protocol late start
3 Called party V.8 protocol late start
4 V.34 reception fallback
5 V.34 transmission fallback
6 not used
7 not used
Detailed Discussions of Bit 0
4
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used
Detailed Discussions of Bit 1
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is
inhibited when called and the V.21 protocol is used.
Detailed Discussions of Bit 2
If ANSam signal is not received during transmission, select whether to use the V.8 protocol
when the other fax machine declares the V.8 protocol in DIS signal. If NO is selected, the CI
signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8
protocol is received.
The V.8 late start is not executed during manual transmission regardless of this setting.
Detailed Discussions of Bit 3
Select whether to declare the V.8 protocol in DIS signal for reception. If NO is selected, the V.8
protocol cannot be used because it is not declared in DIS signal.
The V.8 late start is not executed during manual reception regardless of this setting.
4-10
1 0
No Yes
No Yes
No Yes
No Yes
Prohibited Not prohibited
Prohibited Not prohibited
- -
- -
T-4-20 T-4-20
Detailed Discussions of Bit 4
Select whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the
receiver does not fall back.
Detailed Discussions of Bit 5
Select whether the transmitter falls beck during V.34 transmission. If 'Prohibit' is selected, teh
transmitter does not fall back.
● SSSW-SW30
List of Functions
Bit Function
0 not used
1 not used
2 not used
3 not used
4 not used
5 New dial tone detection method
6 not used
7 not used
Detailed Discussions of Bit 5
When "Detect with the new method" is selected, tone is detected for 3.5 seconds before call
origination in order to discriminate between dial tone and voice. If dial tone is detected and
the time since line seizure is 3.5 seconds or longer, call origination takes place immediately. If
the time since line seizure is less than 3.5 seconds,
call origination takes place after waiting for 1 second. (If the time since line seizure reaches
3.5 seconds during the 1-second waiting period, call origination takes place immediately. By
default, "Detect with a new method" is assigned for this SW.
● SSSW-SW32
List of Functions
Bit Function
0 not used
1 not used
2 not used
3 not used
4 not used
1 0
- -
- -
- -
- -
- -
Detect with the new Detect with the
method. existing method.
- -
- -
T-4-21 T-4-21
1 0
- -
- -
- -
- -
- -