Beko Elektronik A.S
1)
Put the Flat cable into the connector press
down lightly until locking sound ("Dack")
comes out.
5-3-3 Assembling & Disassembling the FFC and TCP from Connector
1. Disassembling of TCP
1)
Open the clamp carefully.
2. Assembling of TCP
1)
Put the TCP into the Connector carefully
* Notice : TCP and Connector was connected surely.
* Notice :
1) Checking whether the foreign material is on the Connector inside before assembling of TCP.
Service Manual
2) Pull the TCP out from Connector.
2)
( The sound (" Dack") comes out. )
36 / 44
Plasma Display Module-Samsung V3
Close the clamp completely.