Table of Contents
Advertisement
When the WAN is connected, the WAN indicator will light up in green and if data is
being transmitted over the Internet, the indicator blinks in green and orange.
Restore to factory default: (IP address, User's. Name and Password)
(1) Pull off the power plug.
(2) Press reset (do not let go of the reset button).
(3) Plug the plug back into the socket (do not let go of the reset button).
(4) Let go of the reset button after 6 seconds. Factory settings will be restored.
NOTE 1: Do not connect FXS ports to each other. Also, do not connect any FXS port directly to a
PSTN line or internal PBX. These may cause damage to FXS.
NOTE 2: Please use the power adapter comes with VoIP Gateway. If using adapters other than the
one comes with VoIP Gateway, it may cause problems and will affect the warranty of the
product.
Rear Panel
DVG-7022S Model
RESET
To reset the
gateway
Or to restore
factory settings
POWER
Connects to the power
adapter (comes with
the gateway)
FXS ports 1,2
(telephone connectors)
Phone sets connection
ports
WAN port
Connects to broadband
Networks such as ADSL,
Cable Modem or Router
LAN ports 1 ~ 4
(built-in Ethernet switch)
Connect LAN hosts here
to share WAN connection.
IP sharing features enabled
5
Advertisement
Table of Contents
