Table of Contents
Advertisement
Picking up a call from the answer machine
You can still answer a call while the answering
machine is recording it by pressing
(handsfree). Recording stops and you can speak to
the caller.
Activating/deactivating Call screening
During the recording of a message you can listen in
via the base station loudspeaker and the registered
handsets (only Gigaset C365), see Menu tree,
page 10.
Setting up the answer machine
The answer machine has already been preset at the
factory. Make individual settings using the handset.
Setting call acceptance
You can set when you want the answer machine to
accept a call.
¢
¢
MENU
Voice Mail
¢
¢
Select Immediately /
OK
¢
/
OK (
30 sec
Auto
Setting the recording time
See Menu tree, page 10.
Setting a different language
You can change the language used for voice
prompts and the pre-recorded announcement.
¢
MENU
3 3 9 2
(starts the procedure).
Select the language: 1 (Chinese), 2 (English)
Assigning key 1 for speed dial to the
answering machine (network mailbox)
Simply press and hold key
you will be connected directly to the answering
machine (network mailbox).
See Menu tree, page 10.
Registering corresponding
handsets
You can register up to four handsets on your base
station.
For automatic registration of handsets to
Gigaset C360/C365, see page 3.
Manual registration of handsets to C360/C365
1. On the handset:
MENU
¢
¢
¢
OK
Handset
system PIN of the base station (default is 0000)
¢
OK.
flashes in the display.
Registering
c or d
¢
OK
Ring Delay
/
10 sec
20 sec
‰
= in)
1
on the handset and
¢
¢
OK
Settings
¢
Enter the
Register HS
7
2. On the base station: within 60 sec. of entering
the system PIN, press and hold the registration/
÷
paging key
Registration can take up to 5 minutes.
Locating a handset ("Paging")
You can locate your handset using the base station.
◆
Briefly press the registration/paging key
ù
on the base station (page 1).
◆
All handsets will ring at the same time ("pag-
ing"), even if the ringtones are switched off.
End paging: briefly press the register/paging key
÷
ù
or
on the base station (page 1) or the talk
c
key
on a handset.
Using several handsets
Making internal calls
Internal calls are no-cost calls to other handsets
/
that are registered to the same base.
Press the INT display key. All handsets are called.
When an internal participant answers you can
speak to them. To end the call, press
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the INT display key. All handsets are
called. The external participant hears the hold
music.
◆
Before the internal participant has answered,
press the end call key
to the participant who answers the call.
◆
After the internal participant has answered,
you can talk to him. Press the end call key
the call is forwarded, or press the
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
caller can listen in on this call and take part in the
conversation. All the participants are made aware
of the 'listening in' by a beep.
Precondition: The Listening in function must be
activated.
Activating/deactivating internal listening in
¢
MENU
Settings
¢
Listening in
ù
or
(page 1) (min. 1 sec.).
a
; the call is forwarded
"
¢
¢
OK
Base
¢
‰
OK
(
= on)
÷
or
a
.
a
;
display key;
¢
OK
Advertisement
Table of Contents
