Advertisement
INPUT / OUTPUT CONNECTIONS
The fiber optic connection is made via a ST connector located on the back of the unit.
Be sure to allow sufficient room for the required minimum bend radius of the fiber cable
used.
The video input connection is made via a BNC connector on the back of the unit. The
video input should be connected to an appropriate 75Ω baseband video source such as
a camera or a video recorder output. For optimum performance the video cables should
be the shortest length of coax practical.
RTM-100 STATUS INDICATOR
The RTM-100 transmitter provides the following LED status indicator to aid in installation
and troubleshooting:
VLI
A bi-color LED indicator is provided for the video input to the RTM-100. DC power and
video status associated with this LED is summarized below.
Video Presence LED
Green
Red
Off
DC Power Status
On
On
Off
3
Video Status
Proper Input Video Present
Input Video Not Detected
Check Power Supply
Advertisement
