Copy Features - Panasonic KX-MB1500C Operating Instructions Manual

9. Programmable Features

9.4 Copy features

Feature/Code
Setting the input tray to use
for copy
MBNM4NM6NM0N
Changing the default copy
resolution
MBNM4NM6NM1N
Holding the previous contrast
setting
MBNM4NM6NM2N
Holding the previous page
layout setting
MBNM4NM6NM7N
Holding the previous zoom
setting
MBNM4NM6NM8N
Holding the previous collate
setting
MBNM4NM6NM9N
Holding the previous edge
setting
MBNM4NM7NM3N
Setting the frame margin
MBNM4NM7NM4N
Holding the previous margin
setting
MBNM4NM7NM5N
54
Selection
M1N "#1" (default): The paper input tray is selected. The displayed paper size
depends on the recording paper size setting (feature #380 on page 48).
M2N "#2": The manual input tray is selected. The displayed paper size depends
on the recording paper size setting (feature #381 on page 48).
To change the default resolution setting for copying.
M1N "TEXT/PHOTO" (default): For documents containing both text and
photographs.
M2N "TEXT": For documents containing only text.
M3N "PHOTO": For documents containing photographs, shaded drawings, etc.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": Your copies will be automatically reduced according to the
margin setting. However, if you change the zoom rate (page 30), your copies
will not be automatically reduced.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.