The Active Subwoofer - Panasonic SC-HTB500 Operating Instructions Manual

Home theater audio system
Hide thumbs Also See for SC-HTB500:
Table of Contents

Advertisement

∫ If the TV's remote control sensor is
blocked by this unit.
Try using the TV's remote control from a different
angle. If the problem persists, you can use the
optional Panasonic IR Blaster (SH-WR10) to relay
the signal to the TV.
≥ The optional Panasonic IR Blaster (SH-WR10) is
only compatible with Panasonic TVs.
Purchase SH-WR10 (Accessory IR Blaster) at
selected dealers or online by visiting our Web Site
at: http://www.panasonic.com
or in Canada: http://www.panasonic.ca
For details, please refer to the operating
instructions for the optional Panasonic IR Blaster.
≥ Do not use the IR Blaster if the TV's remote
control sensor is not blocked by this unit.
∫ If irregular coloring occurs on your TV,
turn the TV off for about 30 minutes.
If it persists, move this unit further away from the
TV.

The Active subwoofer

Place to the right or left of the TV, on the floor or
on a sturdy shelf so that it will not cause
vibration. Leave about 30 cm (11
TV.
To avoid interference, maintain the following
distances between the active subwoofer and
other electronic devices that use the same
radio frequency (2.4 GHz band).
A
A Active subwoofer
B Wireless LAN: approx. 2 m (6
C Cordless phone and other electronic devices:
approx. 2 m (6
/
ft)
1
2
The active subwoofer will automatically seek a
clear channel if any of these other devices
interfere with its communication.
When this happens there is a brief interruption to
the audio coming from the subwoofer.
This is the normal operation of the product
working to assure the best possible performance
of your home theater audio system.
If the interference persists, try moving the other
devices to another location outside the range of
the active subwoofer or move the active
subwoofer nearer to this unit.
≥ Place the active subwoofer within approximately 10 m (33 ft)
of this unit, and in a horizontal position with the top panel
faced upward.
≥ To allow for proper ventilation and to maintain good airflow
around the active subwoofer, position it with at least 5 cm (2z)
of space on all sides.
≥ Do not use the active subwoofer or this unit in a metal
cabinet or bookshelf.
/
z) from the
13
16
B
C
/
ft)
1
2
9

Advertisement

Table of Contents
loading

Table of Contents