Storing Channels in Memory (Automatic Method)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ▲ or ▼ button to select "Auto Program", then press the ENTER
button.
If a channel is locked using the "Child Lock" function, the PIN input
➣
window appears (see page 44).
3.
Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER
button.
Air: "Air" antenna signal.
➣
Cable: "Cable" antenna signal.
Air+Cable: "Air" and "Cable" antenna signals.
If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is
➣
connected to ANT 2 IN (CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the
➣
"Air+Cable".
4.
The TV begins memorizing all available stations.
When pressing the ENTER
➣
message "Would you like to stop the auto channel selection?" is
displayed. Select "Yes" by pressing the ◄ or ► button.
5.
After all the available channels are stored, the "Auto Program" menu
reappears.
Press the EXIT button to exit.
button during a storing process, the
English - 18
Antenna
: Air
Auto Program
Full Guide
Mini Guide
Default Guide
: Mini Guide
Channel List
Fine Tune
Signal strength
LNA
: On
Auto Program
Select the Antenna source to memorize.
Air
Cable
Air+Cable
Move
Enter
Auto Program
Auto Program in Progress.
Stop
Enter
Auto Program
Would you like to stop the auto channel
selection ?
Yes
No
Move
Enter
Auto Program
Auto Program is completed.
34 channels are memorized.
Air : 10
Cable : 24
OK
Enter
►
Start
Start
Start
Return
Air 10
3%
Return
Air 10
3%
Return
Return