Answering Calls - Panasonic KX-TCD300E Operating Instructions Manual

TCD300E(e).book Page 16 Tuesday, October 12, 2004 8:22 PM
Making/Answering Calls
will be heard. Press {R} button to switch
between callers.
This service requires a subscription, consult
your service provider for details.
Note:
L If your unit is connected to a PBX (private
branch exchange), pressing {R} can allow
you to access certain features of your host
PBX such as transferring an extension
call. Consult your PBX dealer for details.
L You can change the recall time (page 28).
Pause button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
Example: If you have to dial {0} before
dialling outside numbers manually, you will
probably pause after dialling {0} until you
hear a dial tone.
1
Press {0}.
2
Press s (right soft key).
3
Dial the phone number, then press {C}
or {s}.
Note:
L Pressing s 1 time creates 1 pause.
Press s repeatedly to create longer
pauses. To change pause length, see
page 28.

Answering calls

1
Lift the handset and press {C} or {s}
when the unit rings.
L You can also answer a call by pressing
any dial key from {0} to {9}, {*}, {#},
or {INT}. (Any key answer feature)
2
When finished talking, press {ih} or
place the handset on the base unit.
16 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not need to
press {C}. To turn this feature on, see
page 24.
To adjust the ringer volume when an
outside call comes in
Press {e} or {v} when an outside call
comes in.
Note:
L The ringer volume cannot be adjusted if
the handset is on the base unit.
Other features
Handset locator
Using this feature, you can locate the
handset if it has been misplaced.
1
Press {x} on the base unit.
L The base unit will page the handset
for about 1 minute.
2
To stop paging, press {x} on the base
unit or press {ih} on the handset.