Table of Contents
Advertisement
"ON": A sending report will be printed out after
every transmission.
"OFF": Sending reports will not be printed out.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3
[±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select "1", "2", "3" (default), "4" or "5
EXT.TAM".
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
=OFF
[±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID to enable remote operation
of the answering machine.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} repeatedly to select "ON".
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is "11".
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialing mode
DIALING MODE
=TONE
[±]
If you cannot dial, change this setting depending
on your telephone line service.
"TONE" (default): For tone dial service.
"PULSE": For rotary pulse dial service.
Code #16: Setting the recording paper size
PAPER SIZE
=LETTER
[±]
"LETTER" (default): Letter size paper.
"LEGAL": Legal size paper.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A
[±]
You can select "A" (default), "B" or "C".
7. Programmable Features
7.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[±]
"ON" (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 37).
"OFF": The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
L This feature is not available for broadcast
transmission.
L The calling charge may be higher as the
transmission speed is slowed down.
"NEXT FAX": This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
"ERROR" (default): When the previous fax
transmission fails and you wish to re-send the
document automatically.
"OFF": Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. Press {MENU}.
3. Press {#} then {2}{5}.
4. Press {A} or {B} repeatedly to select "ON".
5. Press {SET}.
6. Enter the fax number.
7. Press {SET}.
8. Enter the transmission start time.
L Press {*} repeatedly to select "AM" or
"PM".
47
Advertisement
Table of Contents
