4.7 Servo Control
The actuator motor and the spindle motor are submitted to servo control. The
actuator motor is controlled for moving and positioning the head to the track
containing the desired data. To turn the disk at a constant velocity, the actuator
motor is controlled according to the servo data that is written on the data side
beforehand.
4.7.1 Servo control circuit
Figure 4.6 is the block diagram of the servo control circuit. The following
describes the functions of the blocks:
(1)
MPU/HDC/RDC
(2)
Servo
Head
burst
capture
CSR: Current Sense Resister
VCM: Voice Coil Motor
Figure 4.6 Block diagram of servo control circuit
C141-E245
(3)
MPU
DAC
core
Position Sense
(5)
Spindle
motor
control
4.7 Servo Control
SVC
(4)
Power
VCM current
Amp
CSR
(7)
VCM
(6)
Spindle
Driver
motor
4-13