Display Of Sos History; Exit; Hotel Mode - Panasonic TH-32A400H Service Manual

TH-32A400H TH-32A410H
5.1.5.

Display of SOS History

SOS History (Number of LED blinking) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory
shipment setting].
5.1.6.

Exit

1. Disconnect the AC cord from wall outlet.
5.1.7.

Hotel Mode

1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu:
While pressing [VOLUME (-)] button of the main unit,
press [AV] button of the remote control three times within
2 seconds.
Then, the Hotel mode setup menu is displayed.
3. To exit the Hotel mode setup menu
Disconnect AC power cord from wall outlet.
4. Explain the Hotel mode setup menu
All manuals and user guides at all-guides.com
Item
Hotel Mode
Initial INPUT
Initial POS
Initial VOL LEVEL
Maximum Vol Level Adjust maximum volume.
Button Lock
Remote Lock
Hotel Mode USB
Private Information Select private information for VIERA Cast is Keep or
10
Function
Select hotel mode On/Off
Select input signal modes.
Set the input, when each time power is switched on.
Selection :
Off,Analogue,DVB-C,DVB-T,AV1,AV2,HDMI1,
HDMI2
• Off: give priority to a last memory. However, Euro
model is compulsorily set to TV.
Select programme number.
Selection :
Off/0 to 99
• Off: give priority to a last memory.
Adjust the volume when each time power is switched
on.
Selection Range :
Off/0 to 100
• Off: give priority to a last memory.
Range :
0 to 100
Select local key conditions.
Selection :
Off/SETUP/MENU/ALL
• OFF: altogether valid
• SETUP: only F-key is invalid
(Tuning guide (menu) can not be selected.)
• MENU: only F-key is invalid
(only Volume/Mute can be selected.)
• ALL: altogether invalid.
Select remote control key conditions.
Selection :
Off/SETUP/MENU
• OFF: altogether valid.
• SETUP: only Setup menu is invalid.
• MENU: Picture/Sound/Setup menu are invalid.
Basically after user already setup the hotel mode
according to their criteria, what they need to do is
• insert USB (while in hotel mode)
• choose 'Copy TV to USB' to copy the setting into
the USB (a file will be created to store the hotel
mode setting in the USB)
• switch 'OFF' the unit
• pull out USB from unit
To copy the hotel mode setting from USB.
• enter hotel mode
• insert USB
• choose 'Copy USB to TV'
• follow instruction as shown on the units
• once finish, switch 'OFF; the unit
• pull out USB from unit
Reset if Hotel mode is set to [On] when TV power on
Selection :
Keep/Reset
• Keep: private information for VIERA Cast is keep
• Reset: private information for VIERA Cast is
reset