Removing The Shipping Screw - Epson B813152 Use Manual

You may damage the
TPU if you try to use it
without removing the
screw from the hole
labeled CLAMP.

Removing the Shipping Screw

To prevent damage during shipping, a shipping screw is attached to the
TPU to secure its lamp assembly. You must remove this screw before
using the TPU.
1 Turn the TPU so the glass side faces up.
2 Use a Phillips head (cross head) screwdriver to remove the shipping
screw from the hole labeled CLAMP, as shown below.
3 Install the screw in the storage hole labeled STOCK.