The Add Paper Message - Epson PriorityFax 3000 Owner's Manual
Epson priorityfax 3000: user manual
Hide thumbs
Also See for PriorityFax 3000:
- Specifications (1 page) ,
- Product support bulletin (8 pages)
Table of Contents
Advertisement
PriorityFax 3000 Manual
Erasing Names
The Add Paper
Message
To erase
follow these steps:
a name,
If not already shown, bring up the name on the display.
Make sure the cursor is under the first letter of the name you wish
to erase.
Press 0 twice to erase the name.
You may now enter a new name.
If you would rather return to the date/time display without
entering a new name, press SET three times.
button does not operate during most of the
The STOP
registration modes described in this chapter.
The LCD lets you know when to replace the paper roll. When
approximately 4 inches (10 cm) of paper is left, the ADD PAPER
message appears. When you see this
and follow the instructions in Chapter 1 to insert the new roll.
If the PriorityFax runs completely out of paper while receiving a
document, it can still receive up to 28 pages and store them in its
memory. If this happens, you see the ADD PAPER message on the
LCD. Then insert the new roll of paper following the instructions
in Chapter 1.
Then, the unit will print the received document out of memory
automatically.
message, remove the old roll
Advertisement
Table of Contents
