Connectivity Functions; Connecting To A Wired Network; Connecting To A Wireless Network - Hitachi 32HYJ46U Quick Manual

DOWNMIX
This mode can be selected when the digital audio
output of the TV is used.
SURROUND
Surround sound output.
STEREO
Two channels stereo.
PARENTAL
Playing some DVDs can be limited depending on the
age of users. The "Parental Control" function allows
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight
levels. Level "8 ADULT" adjustment let you watch
all of the DVD titles ignoring the DVD disc's parental
level. You can watch the DVD discs, which has the
same or lower parental level than the player's level
only. Menu contents are detailed below:
PASSWORD
Using this item you can change the current password.
To change the password you will be prompted to
enter your old password. After you have entered
your old password, you can now enter the new 4-digit
password. You can use C key to delete the incorrect
entry.
NOTE: Factory preset of the password is "0000".
You have to enter XXXX digital password every time
you want to change the parental level. If you forget
your password please contact technical service.
SPDIF OUTPUT
You can set Spdif Output as PCM or RAW. If you select
PCM from SPDIF Output in DVD menu and play DVD
with Dolby audio, you can get audio output with two
channels via the speakers and the SPDIF Out. If you
select RAW from SPDIF Output in DVD menu and
play DVD with Dolby audio, speakers will be muted
and you can get 5+1 Dolby audio via the SPDIF Out.

Connectivity Functions

Connecting to a Wired Network

For connecting to a wired LAN network, you should
perform the following steps:
• Connect broadband ISP connection ethernet cable to
the ETHERNET INPUT of your modem.
• Ensure that Nero Media Home software is installed to
your PC.(for DLNA function). See Appendix G for more
information on the installation process.
• Afterwards, you should connect your PC to the one of
your modem's LAN connectors (e.g. LAN 1) by using
a proper LAN cable.
• Use another LAN output of your modem (e.g. LAN 2) to
enable the connection to your TV. You can add your TV
For any help concerning set up and use of your TV please call the Customer Helpline:
to your LAN by connecting the LAN port at the rear of
your TV to your modem's LAN connector as illustrated.
• To access and play shared files, you must Select Media
Browser. Press Menu button and select Media Browser
by using Left or Right button. Press OK to continue.
Select the desired file type and press OK. You must
always use the Media Browser screen to access and
play shared network files.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with wired
connection for higher playback quality.
To configure wired settings please refer Network
Settings section in Settings menu.
• You might be able to connect your TV to your LAN
network depending on your network's configuration.
In such a case, use an ethernet cable to connect your
TV directly to the network wall outlet.

Connecting to a Wireless Network

IMPORTANT: A dedicated wireless USB dongle
(available from your dealer) is required for Wi-Fi
operation.
• To use your TV with your wireless network, you
need a dedicated wireless USB dongle. To make
your modem' s SSID visible, you should change
your SSID settings via modem's software. The TV
cannot connect to the networks with hidden SSID.
For connecting to a wireless LAN network, you
should perform the following steps:
English - 22 -
0345 604 0105