Samsung 37X User Manual page 37

Functional Description
25.3. Aux Output
▶ Main Menu/Alarm Setting/Aux Output
AUX Output menu is to operate the camera's peripheral
Main Menu
devices such as lamps and sirens through the controller and
① Camera Setting
switches as well as through network communications.
② Sequence Setting
On/Off :
③ P/T Setting
- Cancels or activates the Aux function.
④ OSD Setting
Time :
⑤ Alarm Setting
⑥ Initialize
Enables setting up a duration for the Aux output when the
 Status
Aux command is transmitted from the controller. A
duration can be selected from a minimum of 1 second to a
➡
maximum of 60 minutes.
Alarm Setting
 Alarm Enable
OFF
② Alarm Input
③ Alarm Output
④ Aux Output AUX Off
➡
AUX Output
 On/Off OFF
 Time 00 SEC
Notes
 •   C onnectingthepowerconnectorandGNDincorrectlytotheAuxterminal'sNOandCOM
ports may cause a short circuit and fire, damaging the camera.
 •   T hemaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,and
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera's
lifespan and damage it.
72
SPEED DOME CAMERA
NO NO
⇨
COM COM
AUX On
User's Manual
Functional Description
Initialize
26. Initialization Menu
▶ Main Menu/Initialize
Power On Reset :
Main Menu
Restarts the camera.
① Camera Setting
Factory Default :
② Sequence Setting
Enables resetting the camera to its factory default settings.
③ P/T Setting
When the mode is selected, all custom data such as preset
④ OSD Setting
locations is deleted from the camera.
⑤ Alarm Setting
Use this function if it is necessary to reset the settings of
⑥ Initialize
the camera.
 Status
Camera Default :
➡
This mode can be used if the camera module has been
Initialize
replaced and you want to keep the camera's existing
settings for the new module.
① Power On Reset
To do reset the camera, first replace the old module with a
② Factory Default
new camera module. When the replacement is properly
③ Camera Default
installed, turn on the module, then execute this command.
 Auto Refresh
OFF
Auto Refresh :
⑤ Auto Track Default
Enables optimizing the status of the camera's built-in
electric circuits and components on a regular basis. (A
regular operation can be scheduled.)
This mode can be used to maintain and repair the current
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
The default setting is Off.
- Off, 1~7 Days: Selecting Off disables Auto Refresh and but
automatically executes it after 1~7 Days days has passed.
action once the refresh is complete.
SPEED DOME CAMERA
73
User's Manual