Plug In And Turn On; Turning Off The Projector - Epson PowerLite S4 Quick Setup Manual

4

Plug in and turn on

1
Open the lens cover.
2
Connect the power cord to the projector and plug
the other end into an electrical outlet.
The Power light turns orange.
3
Press the
You hear a beep, the Power light flashes green, and the
projector lamp comes on in about 4 seconds. The Power
light stays green.
4
Start your video or presentation. If you have connected more
than one video source, use the Source buttons on the remote
control to select the one you want to watch.
NOTE If you connected a notebook
computer and no image is being
projected, you may need to set
up the notebook to output signals
externally. See the Troubleshooting
section for instructions.

Turning off the projector

1
Press the
2
When you see the confirmation message, press the
button again.
3
When the projector beeps twice and the Power light turns
orange, unplug the projector.
Power button on the projector or remote control.
Power button on the projector or remote control.
Source buttons
Power