Page 1 PowerLite 822+/83+ ® Multimedia Projector User’ s Guide...
Page 2: Important Safety Information
Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
Page 3: Table Of Contents
Unpacking the Projector......11 Projector Parts ........12 Additional Components .
Page 4 Adjusting the Volume ......41 Shutting Down the Projector ......42 Using the Remote Control Controlling the Picture and Sound.
Page 5 Cleaning the Lens ....... . 72 Cleaning the Projector Case ......72 Cleaning and Replacing the Air Filter .
Page 6 Opening and Closing EMP Monitor ....96 Registering a Projector ......97 Monitoring Your Projector .
Page 7: Welcome
EMP Monitor software. You can connect up to four devices to the projector at the same time. With the projector’s identify your input source. Just press the button until you see the image you want on the screen.
Page 8: Getting The Most From Your Projector
Welcome Connecting to a laptop or other computer If you want to connect the projector to a laptop or desktop computer, see page 18. For additional presentation control, you can connect an external monitor to view the presentation on your computer simultaneously.
Page 9: Using Your Documentation
PowerLite 83+. If you still need help after checking this User’s Guide and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on your PrivateLine Support card. See page 89 for more information.
Page 10: Registration And Warranty
Road Service at no additional charge. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada, usually within one business day.
Page 11: Unpacking The Projector
PDF User's Guide Projector software CD-ROM CD-ROM Save all packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when you send the projector to another location. See page 78 for transportation instructions. Password Protected...
Page 12: Projector Parts
Projector Parts Front Lamp cover Air exhaust vent Back Remote control sensor Speaker Bottom Welcome Control panel Front adjustable foot S-Video port Audio L-R input ports LAN port Video port Audio Out Monitor Out port port (for Computer1 port output only)
Page 13: Additional Components
■ To receive a component video signal from a VCR or other video device, you need a D-sub, 15-pin, component-to-VGA video cable, which is available from Epson. See page 14. Some older PowerBooks and Macintosh desktop models may ■ need a Macintosh video adapter; see your computer dealer. Older iMac systems may need a special adapter to provide a VGA output port;...
Page 14: Optional Accessories
Optional Accessories note To purchase a replacement To enhance your use of the projector, Epson provides the following remote control, call optional accessories: (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer referral in Canada). Product Replacement lamp Air filter set (includes 2 filters)
Page 15: Setting Up The Projector
Setting Up the Projector his chapter tells you how to set up the projector and connect it to a computer or video source. You can connect up to four devices simultaneously: four video sources, or two computer and two video sources.
Page 16: Positioning The Projector
Try to You can download the leave as much space as possible between the projector and the screen to Projection Distance get a good-size image. Calculator program from the Drivers and Downloads Place the projector somewhere between 3 and 30 feet from the screen.
Page 17: Other Installations
Try to place the projector directly in front of the center of the screen, facing it toward the screen squarely. If the projector isn’t positioned this way, the image will be “keystone” shaped, instead of square or rectangular. If you place the projector below the level of the screen, you’ll have to tilt it up by extending the front adjustable foot, as described on page 39.
Page 18: Connecting To A Computer
Connecting to a Computer You can connect the projector to any computer that has a standard note VGA or BNC monitor port, including PC notebook and laptop If you have an iBook with computers, Macintosh PowerBooks and iBooks, and hand-held an RCA video-out port, devices.
Page 19 If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the button on the projector or remote control.
Page 20: Connecting With A Vga-5Bnc Cable
If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the button on the projector or remote control.
Page 21: Connecting An External Monitor
This lets you view images on your computer monitor while the projector is in standby mode (plugged in but not turned on) and check your presentation or switch between picture sources even if you’ve pressed the...
Page 22: Playing Sound Through The Projector
Playing Sound Through the Projector You can connect a commercially available 3.5 mm stereo mini-jack audio cable to take advantage of the projector’s built-in speaker. You can obtain the audio cable from a computer or electronics dealer. 1. Connect one end of the 3.5 mm stereo mini-jack audio cable to 2.
Page 23: Connecting External Speakers
3. Connect the other end of the cable to your speakers. When you use external speakers with the projector, you can use the volume buttons on the projector or the on the remote control to adjust the volume. First, you need to select the maximum volume on the external speakers.
Page 24: Connecting To Video Sources
For composite video, use a commercially available RCA A/V cable. See page 25. For S-Video, use the S-Video cable supplied with your video device or order one from Epson. See page 26. For RGB video, use the VGA computer cable included with the projector. See page 27.
Page 25: Connecting A Composite Video Source
If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the button on the projector or remote control.
Page 26: Connecting An S-Video Source
You’ll need an S-Video cable, which is usually provided with your video source, or you can purchase one from Epson (part number ELPSV01). See page 14 for ordering information. Before starting, make sure the projector and your DVD player or other video source are turned off.
Page 27: Connecting An Rgb Video Source
Connecting an RGB Video Source Follow these instructions to connect the projector to a video player or satellite receiver that has an RGB video output port using the VGA computer cable that came with the projector. Before starting, make sure the projector and your DVD player or other video source are turned off.
Page 28: Connecting A Component Video Source
If your video source has component video connectors, you can use them to project a higher quality video image. You’ll need a component-to-VGA video cable, which can be purchased from Epson (part number ELPKC19). See page 14 for ordering information.
Page 29: Playing Sound Through The Projector
Playing Sound Through the Projector The projector has a built-in speaker with a maximum output of 10 W. You can play sound from your video equipment through the projector’s speaker if your video device has an audio output port. For RCA-Type Audio Output Ports Most video devices have an RCA-type audio output port.
Page 30 (3.5-mm stereo miniplug to two male RCA plugs) to connect to the projector. 1. Connect one end of the audio adapter cable to the 2. Connect the other end of the audio adapter cable to your video If you don’t need to make any other connections, you can plug in...
Page 31 Audio Out 3. Connect the other end of the cable to your speakers. When you use external speakers with the projector, you can use the volume buttons on the projector or the on the remote control to adjust the volume. First, you need to select the maximum volume on the external speakers.
Page 32 Setting Up the Projector...
Page 33: Projecting
Projecting nce you’ve set up the projector, you’re ready to turn it on, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote.
Page 34: Turning On Your Equipment
If you turn on your connected computer or video equipment before starting the projector, the projector automatically detects and displays the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually.
Page 35 To focus and adjust the image, see page 38. If a projected image fails to appear, see “What To Do If You See a Blank Screen” on page 36. When you’re done, shut down the projector as described on page 42. Power...
Page 36: Selecting The Image Source
A/V Mute Make sure you’ve selected the correct image source; see the previous section. Allow a few seconds for the projector to sync up after pressing the button. Check the Signal menu to make sure the correct input source is selected.
Page 37 If you’re using a Macintosh laptop with OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Display Displays.
Page 38: Adjusting The Image
Rotate the focus ring to sharpen the image, and the zoom ring to reduce or enlarge the image. You can also change the image size by moving the projector closer to or farther away from the screen. You can use the the remote control to zoom in on a portion of the image.
Page 39: Adjusting The Height Of Your Image
The projector automatically corrects images that are distorted when the projector is tilted up or down (up to a 30° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn’t rectangular, follow the instructions in the next section.
Page 40: Adjusting The Image Shape
Adjusting the Image Shape If the projector is tilted up or down, the images that are displayed will be distorted. To correct the distortion or “keystone” shape, do one or more of the following: ■ ■ ■ You can also make keystone adjustments using the projector’s Settings menu.
Page 41: Correcting Computer Images
Vol- Vol+ increase or decrease the volume. You can also use the buttons on the projector to control the volume. Press the button to increase the volume, or the decrease it. A volume gauge appears on the screen while the volume is being adjusted.
Page 42: Shutting Down The Projector
59. Turn off this product when not in use to prolong the life of the projector. 4. Press up on the blue foot release lever and lower the projector to 5. Close the caution To avoid damaging the 6. Unplug the power cord.
Page 43: Using The Remote Control
Chapter 4.) When using the remote control, stand within 20 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen).
Page 44: Controlling The Picture And Sound
You can use the remote control to select your source, adjust the colors, temporarily turn off the picture and sound, freeze the action, or zoom in on the picture. Make sure you have set up your projector and connected any equipment as described in Chapter 1.
Page 45: Adjusting The Color Mode
Blackboard Choose this fixed color mode when you need to project against a green blackboard. You can also use the projector menu system to change the color mode in the Image menu (see page 53). Color Mode Color...
Page 46: Turning Off The Picture And Sound
Using the Remote Control button on the remote control or use the A/V Mute slide on the projector to turn off the image and sound and To turn off the picture and sound, press the close the slide on the projector. The screen goes dark.
Page 47: Zooming Your Image
Normal Press the button again to cycle through the available options. Aspect You can also change the aspect ratio using the projector’s Signal menu. See page 54 for details. button to enlarge the selected button to return to the original...
Page 48: Replacing The Batteries
Replacing the Batteries The remote control uses two AA alkaline batteries. Follow these steps note when you need to replace them: The remote control 1. Press in the tab to remove the battery cover. automatically shuts off when it detects a button being pressed more than 30 seconds.
Page 49: Fine-Tuning The Projector
Adjusting the input signal ■ ■ Customizing projector features ■ Selecting projector setup options Viewing lamp usage and other information ■ ■ Using the projector’s security features ■ Restoring the default settings button on the projector or remote control to...
Page 50: Using The Projector's Menu System
See page 56. menu lets you customize the way you set up the Extended projector.
Page 51: Changing Menu Settings
Changing Menu Settings Use the buttons on the remote control or on the projector to access the menus and change settings. Follow these steps: 1. Press the button on the remote control or projector to Menu display the menu screen:...
Page 52: Adjusting Colors And Clarity
Component, composite, and S-Video Fine-tuning the Projector Press the left or right arrow buttons on the projector or the remote control to adjust a slider bar. To select from two or more settings, use the up or down arrow buttons on the projector or the remote control to highlight the...
Page 53 Adjusts the difference between light and dark areas. (component, composite, and S-Video) ■ Color Saturation Adjusts the depth or intensity of the image colors. to set the Enter note You can also select brightness mode in the Settings menu. See page 57. Fine-tuning the Projector High...
Page 54: Adjusting The Input Signal
4. When the image is set correctly, press Adjusting the Input Signal Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to manually select it. You can also change the position of the projected image, correct tracking and sync, and change the aspect ratio to widescreen format.
Page 55 See page 86 for more information. (computer images) ■ Sync Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer. See page 86 for more information. (computer images) ■ Position Use the arrow buttons to move the image on the screen left, right, up, or down.
Page 56: Customizing Projector Features
4. When you’re finished, press Customizing Projector Features The Settings menu lets you customize the way you use the projector, from adjusting volume and lamp brightness to applying security controls. 1. Press the 2. Select the Fine-tuning the Projector (composite and S-Video) ■...
Page 57 Adjusts a distorted image from a trapezoid shape to rectangular. ■ Auto Keystone Automatically adjusts a distorted image from a trapezoid shape to rectangular when the projector’s foot is extended or retracted. (Not available when you’re projecting from the ceiling or using rear projection.) Select ■ Operation Lock...
Page 58: Selecting Projector Setup Options
Selecting Projector Setup Options Use the Extended menu to customize the way you set up the projector. You can configure the projector for rear and/or ceiling projection, change the language for the menus and messages, set the screen background color, capture and store a custom image or logo for the startup screen.
Page 59 ■ User’s Logo Turn on to display the image or logo you have captured whenever the projector is turned on. See page 64 for more information. ■ Projection Projector is in front of the screen. Front: Projector is in front of the screen, mounted Front/Ceiling: upside-down from the ceiling.
Page 60: Selecting Network Settings
■ Standby Mode Select to allow the projector to be monitored Network On over a network when the projector is in standby mode (the light is orange). Power ■ Language Select the language to be used for the projector menus.
Page 61: Viewing Lamp Usage And Other Information
Signal menu. See page 54 for details. Video (Composite video, S-Video) note High The lamp usage timer brightness doesn’t register until you’ve used the lamp for at least 10 hours. Fine-tuning the Projector...
Page 62: Using The Projector's Security Features
■ ■ If you create a user’s logo for the projector, you can lock the logo on so it is displayed as the startup screen and/or AV/Mute screen. Unauthorized users cannot turn it off or change it. This feature is intended to discourage theft and provides a way to identify the projector should it be stolen.
Page 63 30 times in a row, the projector is locked and you’ll need to contact Epson to unlock it. See “Where To Get Help” on page 89. If someone else will be using the projector for awhile but you want to make sure that person returns it by a certain time, you can temporarily disable the password for a set period.
Page 64: Creating Your Own Screen Logo
The projector considers this image the “User’s Logo.” Follow these steps to capture the image and transfer it to the projector: 1. Display the image you want to use on the projector. You can use 2. Press the note If the User’s Logo Protect...
Page 65: Setting A Password
8. When you see the message and press . Saving the logo takes a few moments. Do Enter not use the projector or other sources (computer, video, etc.) while the logo is being saved. When you see the message , press Completed 9.
Page 66: Turning On The Password And User's Logo
If you lose the remote control, you will not be able to enter the password, so keep the remote control in a safe place at all times. You can attach the password protect sticker to the projector as an additional theft deterrent.
Page 67: Starting The Projector With A Password
If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson for service. If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance.
Page 68: Disabling The Projector's Buttons
Enter button. Menu You can use the security slot on the base of the projector to install a Kensington Microsaver Security System. See page 14. You can use a wire lock to secure the projector to a room fixture or heavy furniture, as shown below: button.
Page 69: Restoring The Default Settings
Restoring the Default Settings The Reset menu lets you return most projector menu settings to their default values. It also lets you reset the lamp hours to their initial default value; see page 77 for instructions on resetting the lamp timer.
Page 70 Fine-tuning the Projector...
Page 71: Maintenance And Transportation
You may need to clean the air filter and air vents. A clogged air filter the projector, turn it off and unplug the power cord. or air vent can block ventilation needed to cool the projector and Never open any cover on the cause overheating.
Page 72: Cleaning The Lens
Cleaning and Replacing the Air Filter Your projector includes an air filter to ensure the best performance. If dust collects on the air filter or vent on the bottom of the projector, clean them as described below. Dust clogs prevent proper ventilation and can cause overheating and damage the projector.
Page 73 1. Turn off the projector, allow it to cool down, and unplug the power cord. 2. To clean the filter and vent, Epson recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean them using a very soft brush (such as an artist’s paintbrush).
Page 74: Replacing The Lamp
Turn off this product when ■ not in use to prolong the life of the projector. Contact your dealer or call Epson at (800) 463-7766 for a replacement lamp. Request part number V13H010L42. Follow these steps to replace the lamp: warning 1.
Page 75 3. Use the screwdriver included with the replacement lamp or a #2 Phillips-head screwdriver to loosen the screw holding the lamp cover (the lamp cover is located on top of the projector). 4. Slide the cover out, then lift it off.
Page 76 Push the lamp down firmly where the label appears. PUSH covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screw.
Page 77: Resetting The Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the warning message. Follow these steps: Replace the Lamp 1. Connect the power cable and turn on the projector. 2. Press the button on the remote control or projector and...
Page 78: Transporting The Projector
Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, please follow these packing guidelines to prevent damage to the projector: ■ note Epson shall not be liable for ■ any damage incurred during transportation.
Page 79: Solving Problems
Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: Using the projector’s on-screen help system ■ What to do when the projector’s status lights flash ■...
Page 80: Using On-Screen Help
The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended in the following table.
Page 81 If this does not solve the problem, turn the projector off and unplug it. Contact Epson for help; see page 89. There is an internal error in the projector. Turn the projector off and unplug it. Contact Epson for help; see page 89. ° °...
Page 82: Solving Problems With The Image Or Sound
Enter 7 seconds to release the lock. The projector may be in standby or sleep mode. If the projector has not received any signal for 30 minutes, it turns off the lamp to conserve the lamp life and save energy. If the P orange, press the P button to turn on the projector.
Page 83 Source Search projector or the remote control to select the correct source. Allow a few seconds for the projector to sync up after pressing the button. If you’ve connected a laptop computer, make sure it’s set to ■...
Page 84 See your software documentation for specific information. Make sure the projector isn’t placed off to one side of the screen, at an angle, or the image won’t be rectangular. Place it directly in front of the center of the screen, facing the screen squarely.
Page 85 Try cleaning the lens as described on page 72. ■ ■ Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment. Make sure the projection distance is within the range described on ■...
Page 86 Press the button on the remote control to Enter/Auto automatically reset the projector’s tracking and sync settings. If necessary, you can manually adjust the settings on the Signal menu as described on page 55. To help you adjust these settings, fill the screen with a detailed image, such as a desktop background pattern or black text on a white background.
Page 87: Solving Password Problems
0000 The remote control is not available. You must have the remote control to enter the password. You can purchase a replacement remote control from Epson. See page 90. button on the Vol+ A/V Mute Source Search...
Page 88: Solving Problems With The Remote Control
■ You have lost the remote control. You need the remote control to access many projector features. If you have lost it, you can order another from Epson. See page 90 for details. Solving Problems Make sure you are within 20 feet of the projector, and within range of the projector’s front or back sensor (approximately 30°...
Page 89: Solving Network Problems
Epson provides these technical support services: Internet Support Visit Epson’s support website for solutions to common problems with the PowerLite 822+ or PowerLite 83+. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Page 90: Speak To A Support Representative
Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.
Page 91: Monitoring The Projector Over A Network
Monitoring the Projector Over a Network he software included with your projector lets you monitor and control your projector over a network. Use EMP Monitor (available for Windows only) to see your ■ projector’s status, switch image sources, and control basic settings.
Page 92: Installing The Network Software
Installing the Network Software The network software CD-ROM includes the software you need to monitor the projector from a remote location. The Epson Projector Software CD-ROM includes EMP Monitor for monitoring the projector from a remote location. Windows System Requirements...
Page 93: Connecting To The Network
Connecting to the Network Follow these steps to connect the projector to your network and configure it with an IP address. 1. Connect the projector to your network using a commercially available 100BaseTX or 10BaseT network cable. Connect the cable to the port on the projector.
Page 94: Selecting Network Settings
Selecting Network Settings Follow the instructions in this section to set up the projector’s network settings in the menu system. 1. Press the 2. Select the 3. Press Monitoring the Projector Over a Network button. Menu menu. Network . Then use the up and down arrow buttons and the...
Page 95: Using Projector E-Mail Alerts
■ Projector Name Enter a name for identifying the projector over the network. Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. 1. Press the button, select the...
Page 96: Using Emp Monitor
If you want to monitor the EMP Monitor lets you use a remote computer to manage your projector while it is in projectors. It lets you easily turn the projector on or off, switch image standby mode, select sources, and check its status.
Page 97: Registering A Projector
3. Click to locate projectors currently operating on the Search network. 4. Select the projector you want to add by clicking its name, then click the button. Edit 5. Enter a Display name, select a Parent group, if necessary, enter a Monitor Password, if necessary, and a Description for the projector.
Page 98 Monitoring the Projector Over a Network No warnings or problems. Warning or problem. Monitor Password error. No monitor password was entered when you registered the projector, or an incorrect password was entered. Monitoring disabled. Right-click the icon and select Monitoring Enabled to monitor the projector.
Page 99 Low air flow. The air filter needs to be cleaned or replaced. Air flow sensor error. Contact Epson as described on page 89. Lamp cover door open. Close the lamp cover door. Lamp out. The lamp has reached the end of its life.
Page 100: Using E-Mail Alerts
7. Click the 8. When you’re done, click the If a projector experiences a problem, EMP Monitor sends an e-mail message to each of the addresses you entered in the Set mail notification function window. The subject line and body of the note message includes the projector’s name and the warning or error...
Page 101: Using A Browser To Monitor The Projector
Using a Browser to Monitor the Projector If your projector is connected to a network, you can use a standard web browser to monitor and control it. When using a browser to access the projector, you cannot connect through a proxy server.
Page 102 Monitoring the Projector Over a Network...
Page 103: Technical Specifications
Technical Specifications General Type of display Lens Resolution Color reproduction Brightness (ANSI) PowerLite 822+ Brightness (ANSI) PowerLite 83+ Contrast ratio Image size Projection distance Projection methods Focus adjustment Zoom adjustment Internal sound system Optical aspect ratio Zoom ratio Poly-silicon TFT active matrix F=1.6 to 1.74, 18.4 to 22.12 mm...
Page 104: Projection Lamp
Noise level note Keystone correction Lamp life results will vary angle depending upon mode selected, environmental conditions and usage. Lamp Projection Lamp brightness decreases over Power consumption time. Lamp life Remote Control Range Batteries (2) Dimensions Height (including feet) 4.3 inches (108 mm) Width Depth Weight...
Page 105: Environmental
Up to 7,500 feet (2,286 m) with High Altitude Mode enabled; see page 58 Safety and Approvals United States FCC Part15B Class B (DoC) UL60950-1 Canada ICES-003 Class B CSA C22.2 No. 60950-1 Pixelworks projector. ™ ™ ICs are used in this Technical Specifications...
Page 106: Compatible Video Formats
Compatible Video Formats You can use any of the following video sources: VCR, DVD player, camcorder, digital camera, or gaming console. The projector supports composite video, S-Video, component video, and RGB video, and it automatically senses the video format (HDTV, SDTV, NTSC, PAL, or SECAM).
Page 107: Compatible Computer Display Formats
™ SPARCstation. Although images are displayed at the projector’s native resolution of 1024 × 768 pixels, Epson’s patented SizeWise chip supports computer display formats ranging from VGA through UXGA. To project images output from a computer, the computer’s external monitor signal must be set at a refresh rate (vertical frequency) that’s compatible with the projector;...
Page 108 The projector supports these monitor display formats: Mode VGA EGA VGA—60 VESA—72 VESA—75 VESA—85 VGA—120 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 SVGA—120 XGA—60 XGA—70 XGA—75 XGA—85 XGA—120 SXGA1—70 SXGA1—75 SXGA1—85 SXGA1—100 SXGA2—60 SXGA2—75 SXGA2—85 SXGA3—60 SXGA3—75 SXGA3—85 SXGA+—60 SXGA+—75 SXGA+—85 UXGA—60...
Page 109 Mode Refresh Rate (Hz) iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19—60 MAC19 MAC21 SDTV 480i SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) 50/60 HDTV (1080i) 50/60 Resolution 640 × 480 800 × 600 1024 × 768 640 × 480 832 ×...
Page 110 Technical Specifications...
Page 111: Notices
■ Do not use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company. ■ Place the projector near a wall outlet where the plug can be easily unplugged.
Page 112 If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service.
Page 113: Fcc Compliance Statement
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 114 Notices...
Page 115: Index
Component-to-VGA video cable, 13 to 14, 24, Composite video cable, 24 to 25 Computer cable, 11, 18 to 20 connecting to projector, 18 to 22 source, selecting, 19, 20, 36, 44, 55 support, 7 supported display formats, 107 to 109...
Page 116 High brightness, 40, 74, 82, 103 iBook, connecting to, 18 to 19 iMac, connecting to, 13, 18 to 20 Image capturing and saving in projector, 64 to 65 correcting shape of, 40, 57, 84 fitting on screen, 41, 55, 56, 84 focusing, 38...
Page 117 EMP Monitor, 96 to 100 with browser, 101 Moving projector, 78 Network connecting to, 93 managing projector remotely, 91 to 101 menu, 50, 60, 94 to 96 problems, 89 settings, 60, 94 to 96, 97 system requirements, 92 Network Protect password, 66...
Page 118 Resolution, 7, 61, 103, 107 to 109 Safety approvals, 105 instructions, 111 to 112 Screen logo, see User’s Logo Screen, distance from projector, 16, 103 Screens, portable, 14 Setting a password, 65 to 66 Settings menu, 50, 56 to 57 Sharpness setting, 54...
Page 119 88 Turning off audio, 46 picture, 46 projector, 42 Turning on password, 66 projector, 34 to 35 User’s Logo, 59, 66 Typing the password, 67 Unpacking projector, 11 User’s Logo creating, 64 to 65 displaying, 65 to 66...

This manual is also suitable for:

Powerlite 83+V11h303020 - powerlite 83+ xga lcd projector V11h304020 - powerlite 822+ xga lcd projector Rb-v11h303020-n - powerlite 83+ lcd projector Powerlite822+

Epson PowerLite 822 User Manual

Welcome

Setting up the Projector

Projecting

Using the Remote Control

Fine-Tuning the Projector

Maintenance and Transportation

Solving Problems

Monitoring the Projector over a Network

Technical Specifications

Notices

Index

Quick Links

Related Manuals for Epson PowerLite 822

Summary of Contents for Epson PowerLite 822

This manual is also suitable for:

Table of Contents