Table of Contents
Advertisement
en Troubleshooting
Fault
The programme does not
start.
The door cannot be opened. – – – is activated.
The water is not draining.
50
Cause
Childproof lock is activated.
Finish in is activated.
Laundry is caught in the
door.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
– – – is activated.
troubleshooting
Press Start/Reload to start the pro-
2.
gramme.
→ "Deactivating the childproof
▶
lock", Page 40
Check whether Finish in is activ-
▶
ated.
→ "Buttons", Page 28
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Reload to start the pro-
4.
gramme.
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start/Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 39
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 39
Start the Drain programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 55
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and wa-
▶
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
▶
Page 43
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start/Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 39
Advertisement
Table of Contents
