Creating A Custom Preset And Printing - Epson Stylus Pro 4000 Printer Manual

Note: These settings
override settings made
through the control panel.
Note: If you check the
settings on each screen
in the pull-down menu,
go through them carefully
from top to bottom.
Avoid cycling through
them repeatedly, or you
may lose your settings.
Printing with EPSON Drivers for Macintosh
2. Choose one of the following
• Normal Cut
image.
• Double Cut
print individually. This provides the cleanest edge for borderless
printing.
causes the images to be printed end-to-end and saves
• Single Cut
paper. With borderless printing, you may see a sliver of the previous
or next image.
disables automatic cutting. Choose this setting if you want to
• Off
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut with
scissors.
See page 38 for instructions on using the button to operate the
cutter. See page 32 for a list of media that do not work with the
built-in cutter.
3. Select either of the following options:
• Print Page Line
your pages.
• Save Roll Paper
the last page of your document. Available only when you've selected
Roll Paper (Banner)

Creating a Custom Preset and Printing

Once you've made the correct settings for your print job, create a custom
preset. This will save you time when you use the same
profile/printer/ink/media combination for future print jobs.
1. Select
Summary
2. After verifying that your settings are correct, select
Presets pull-down menu.
2-53
Auto Cut
allows margin space at the top and bottom of each
extends the space between the images and trims each
prints trim lines on the right and bottom edges of
saves paper by not feeding the blank portion of
as the Paper Source.
from the pull-down menu.
settings:
from the
Save As
| 53