Huawei Airbridge cBTS3612 Maintenance Manual page 9

On-site Maintenance Manual
Airbridge cBTS3612 CDMA Base Station
Table 1-2 Antenna and feeder configuration and radio frequency indexes
Item
Sector
Carrier
transmit
power
Standing
wave ratio
Antenna
position
angle/down-
pitch angle
&
Note:
1. If the station is to be configured as an omni-directional cell, specify the antenna
and feeder information in Sector 1.
2. The carrier transmit power is that measured on top of the cabinet after the station
is officially set up and running.
3. The standing wave ratio is that measured at the RF jumper connector (the end
connecting to the CDU or DFU or DDU panel) in the cabinet with a standing wave
ratio measurer.
For the cabinet configuration information, please specify in the
relevant spaces in Figure 1-1, Figure 1-2, Figure 1-3 and Figure 1-4
the names of the boards and modules (use acronyms wherever
possible).
For the baseband subrack of the basic cabinet, specify in the
relevant space in Figure 1-2, (baseband subrack in Figure 1-1 can
Sector Sector
1 2
Chapter 1 Daily Maintenance
Contents
Sector Sector
3 4
1-2
Remarks
Sector
5 6