Table of Contents
Advertisement
Setting the timer program
In each of PROG 1 and PROG 2, the timer data including the operating period and played contents can be
program and set to be activated or deactivated.
Adjust the clock before setting the timer
Connect the related equipment under reference to "System connection"
1
M ake preparations for the play (recording).
To listen to CD
Insert a disc.
(Program playback is not possi-
ble.)
To listen to radio
The station should be preset pri-
¡
or.
÷ Tw o timer settings can be reserved independently in tw o programs PROG 1 and PROG 2.
÷ Please make reservations w ith an interval of at least one minute, so that the operation times of PROG 1 and PROG 2 do
not overlap.
2
Set the timer setting program number.
1
Select "TIM ER
\
\
(Press the set/ demo key w hile the "?" mark is
blinking.)
2
Select "PROG 1 ?" or "PROG 2 ?".
3
Set it.
(PROG. TIM ER)
‡
To listen to tape
Insert a tape.
Playing the auxiliary input source
M ake timer setting of the compo-
nent connected to the AUX input
jacks.
?".
\
\
6~8
M ake preparations for record-
ing.
Each press sw itches the display contents.
"TAPE RVS"
"AUTO PRESET ?" or "AUTO M EM ORY ?"
(Only w hen the TUNER input is selected)
"INPUT
(Only w hen the AUX input is selected)
"TIM ER
"TIM E ADJUST
"APS
Each press sw itches the display contents.
1 "PROG 1 ?"
2 "PROG 2 ?"
÷ The previously set contents are displayed. (If you do not
w ant to change them, simply press the set/ demo key.)
÷ When a timer setting has already been made in the
selected timer, the setting w ill be overw ritten by the
new setting.
Timer operation
For recording
§
?"
?"
?"
?"
Continued on next page
39
EN
Advertisement
Table of Contents
