4. Connections
4. Connections
4.1 Connecting with the Target System
The following shows examples of wiring between the ICDmini Ver. 3.0 and the target system.
• When the power voltage for interfacing with the S1C17 MCU is supplied from the target system to the
ICDmini Ver. 3.0
• When the power voltage (3.3 V) for interfacing with the S1C17 MCU is supplied from the ICDmini Ver.
3.0 to the target system
Note!
Refer to the "Basic External Connection Diagram" in the Technical Manual for the target S1C17 MCU to
determine the wiring and elements to be connected.
6
Figure 4.1.1(a) Target System Connection Example 1
Figure 4.1.1(b) Target System Connection Example 2
Seiko Epson Corporation
ICDmini Ver. 3.0 User Manual
(Rev 1.0)