Table of Contents
Advertisement
Setting Power Options
The [Power Options] can be saved in the detector.
1
Launch "Launching Program"> "IP Address Check and Ping Test"> "Save Location Check"> "Apply" in order.
2
Select the
> [DXD] tabs.
3
Select the option in [Auto Sleep] and [Auto Power-Off].
4
Click the [Save] button to save the [Power Options] in the detector.
NOTE
•
Only the above settings will be saved in
•
The detector enters into Standby mode when there is no communication for a set period of time.
•
The detector does not enter into Standby mode while
•
This feature is enabled in a wireless model only.
46
.
is running (i.e., starting from Apply to the point the program ends).
Advertisement
Chapters
Table of Contents
